SHARKBITE

When transitioning pipe size, there is no easier way than with SharkBite push-fit reducing elbows. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need...

When transitioning pipe size, there is no easier way than with SharkBite push-fit reducing elbows. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push-to-connect and move on. This quick-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.Unit: EA

SharkBite Pipe Adapter, Nominal Size: 3/4 in, Barb x FNPT Connection, 80 to 160 psi, Operating Temperature: 33 to 200 deg F, Brass, Suitable for: PEX TubingUnit: BAG5

SharkBite Pipe Adapter, Nominal Size: 3/4 in, Barb x FNPT Connection, 80 to 160 psi, Operating Temperature: 33 to 200 deg F, Brass, Suitable for: PEX TubingUnit: BAG5

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications.Unit: EA

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.Unit: EA

SharkBite reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. These fittings are easily rotated after installation to make connecting even easier...

SharkBite reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. These fittings are easily rotated after installation to make connecting even easier in tight spaces. There is no need for soldering, clamps, unions or glue.Unit: EA

Unit: EA

Unit: EA

The SharkBite tee stop combines a SharkBite push-to-connect tee with a 1/4 in compression line and a quarter turn valve for easy on/off control of the supply line. This product is particularly...

The SharkBite tee stop combines a SharkBite push-to-connect tee with a 1/4 in compression line and a quarter turn valve for easy on/off control of the supply line. This product is particularly useful for adding supply lines to fixtures such as dishwashers, humidifiers and ice makers. The Tee Stop also commonly serves as an alternative to a saddle valve. It can be used on Copper, PEX, CPVC or PE-RT tubing. The valve is easily rotated after assembly for easy installation, even in tight...

Cash Acme Straight Stop, 1/2 in Connection, MPT Connection, Media: Water, Body Material: Brass, ChromeUnit: EA

Cash Acme Straight Stop, 1/2 in Connection, MPT Connection, Media: Water, Body Material: Brass, ChromeUnit: EA

Transition between PEX pipe and an FNPT threaded connection with a crimp or clamp connection. Certified for use in potable water and hydronic heating systems.Unit: PK10

Transition between PEX pipe and an FNPT threaded connection with a crimp or clamp connection. Certified for use in potable water and hydronic heating systems.Unit: PK10

SharkBite male elbows are MNPT on one end and push-to-connect on the opposite end. These fittings allow the user to make a 90 deg connection to copper, PEX, CPVC or PE-RT pipes. This fitting is...

SharkBite male elbows are MNPT on one end and push-to-connect on the opposite end. These fittings allow the user to make a 90 deg connection to copper, PEX, CPVC or PE-RT pipes. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.Unit: EA

The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply...

The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The coupler fitting ensures an easier working environment in...

SharkBite Washing Machine Valve, Specifications: 33 to 200 deg F Working, 80 to 160 psi, Brass, Suitable for: PEX and PE-RT PipeUnit: EA

SharkBite Washing Machine Valve, Specifications: 33 to 200 deg F Working, 80 to 160 psi, Brass, Suitable for: PEX and PE-RT PipeUnit: EA

Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1...

Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.Unit: EA

The SharkBite PEX/barb connection system is the best option for connecting PEX pipe in water distribution systems when lower material cost is desired. Robustly constructed with lead-free DZR brass,...

The SharkBite PEX/barb connection system is the best option for connecting PEX pipe in water distribution systems when lower material cost is desired. Robustly constructed with lead-free DZR brass, the SharkBite barb fittings are corrosion-resistant. With a wide range of fittings, manifolds, valves, clamp rings, crimp rings, ball valves and tools available, the SharkBite PEX/barb connection system is perfect for your next plumbing project.Unit: BAG10

The SharkBite push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8...

The SharkBite push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.Unit: EA

An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation...

An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide.Unit: EA

The SharkBite PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a...

The SharkBite PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a male sweat connection that can be soldered.Unit: EA

Used to control water flow and enables water supply shutoff for servicing and making repairs. Certified for use in potable water and hydronic heating systems.Unit: EA

Used to control water flow and enables water supply shutoff for servicing and making repairs. Certified for use in potable water and hydronic heating systems.Unit: EA

The SharkBite straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required,...

The SharkBite straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the...

Innovative push-to-connect design makes for quick and easy transition between PEX, copper, CPVC, PE-RT or HDPE pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install...

Innovative push-to-connect design makes for quick and easy transition between PEX, copper, CPVC, PE-RT or HDPE pipe to an MNPT threaded connection. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.Unit: EA

SharkBite 22604LF water heater kit 1/2 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the...

SharkBite 22604LF water heater kit 1/2 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the user to connect a water distribution pipe with ease. This product is lead free.Unit: EA

When transitioning pipe size, there is no easier way than with SharkBite push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no...

When transitioning pipe size, there is no easier way than with SharkBite push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi.Unit: EA

SharkBite Pipe Elbow, Nominal Size: 3/4 in, Barb Connection, Angle: 90 deg, 80 to 160 psi, Operating Temperature: 33 to 200 deg F, BrassUnit: BAG10

SharkBite Pipe Elbow, Nominal Size: 3/4 in, Barb Connection, Angle: 90 deg, 80 to 160 psi, Operating Temperature: 33 to 200 deg F, BrassUnit: BAG10

Controls water flow to household plumbing fixtures and allows 2 independent supply lines to be attached to one single stop valve. Typically used on stub-outs coming out of the wall. Used to control...

Controls water flow to household plumbing fixtures and allows 2 independent supply lines to be attached to one single stop valve. Typically used on stub-outs coming out of the wall. Used to control and shut Off water flow to the fixture for maintenance and repair. Innovative design with 1/2 in push-to-connect inlet and (2) 3/8 in compression outlets make for quick installation and quarter turn full port brass ball valve makes for easy operation. Ideal for working in tight spaces. Faster...