SHARKBITE

Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed.Unit: COIL ...

Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed.Unit: COIL

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment.Unit: EA

SharkBite PEX tubing is a cross-linked polyethylene pipe for a range of residential and commercial plumbing applications. This pipe is approved for all potable water systems and is also available in...

SharkBite PEX tubing is a cross-linked polyethylene pipe for a range of residential and commercial plumbing applications. This pipe is approved for all potable water systems and is also available in red and white colors. SharkBite PEX is approved for crimp, clamp or push-to-connect plumbing systems. The pipe comes with a repeating SharkBite imprinted pattern which serves as a visual aid to determine if the tube has been inserted correctly into SharkBite push-to-connect fittings. This feature...

SharkBite female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can...

SharkBite female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required.Unit: EA

Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit...

Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means that the end cap provides a leak-proof seal and can be removed at any stage in order to allow work to restart or allow an extension to the system. This makes the fitting the ideal tool for when water needs to be turned back on, overnight for...

SharkBite Ball Valve, 1/2 in Connection, Barb Connection, 200 psi, Temperature Rating: 200 deg F, Media: Water, Body Material: BrassUnit: EA

SharkBite Ball Valve, 1/2 in Connection, Barb Connection, 200 psi, Temperature Rating: 200 deg F, Media: Water, Body Material: BrassUnit: EA

Need to make a change to an installed SharkBite PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC...

Need to make a change to an installed SharkBite PVC fitting or remove it. Disassembly is fast and easy using the PVC depth gauge and disconnect clip. This product also indicates how deep the PVC pipe needs to be inserted into a SharkBite PVC fitting in order to form a watertight seal. This product is available in a variety of sizes ranging from 1/2 to 1 in.Unit: EA

SharkBite PVC transition couplings connect PVC pipe (SCH 40, 80 and 120) to Copper, PEX, CPVC and PE-RT tubing with no solder, clamps, unions or glue required. The white colored collar is intended...

SharkBite PVC transition couplings connect PVC pipe (SCH 40, 80 and 120) to Copper, PEX, CPVC and PE-RT tubing with no solder, clamps, unions or glue required. The white colored collar is intended for use on PVC pipe while the tan colored collar is intended for Copper, PEX, CPVC or PE-RT. This fitting is not intended to be connected to PVC pipe on both sides of the fitting.Unit: EA

Drop ear elbows are used to transition from Copper, PEX, CPVC or PE-RT to threaded pipe, such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for...

Drop ear elbows are used to transition from Copper, PEX, CPVC or PE-RT to threaded pipe, such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for securing to a surface, such as a stud or wall and they provide additional stability. SharkBite drop ear elbows are compatible with copper, CPVC and PEX pipe and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable...

The ASVPP range is offered in white polypropylene with food-grade EPDM O-ring. The valve connects between your valve and riser, to the main water supply line, for applications in reverse osmosis,...

The ASVPP range is offered in white polypropylene with food-grade EPDM O-ring. The valve connects between your valve and riser, to the main water supply line, for applications in reverse osmosis, filtration systems, automatic coffee brewers, ice-makers and many more. The valves are not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.Unit: EA

SharkBite male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes...

SharkBite male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.Unit: EA

The SharkBite PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing...

The SharkBite PVC transition slip tee allows you to add a line into your existing plumbing system while converting from copper pipe to PVC pipe. The slip feature allows you to cut into an existing copper or CPVC pipe and run out PVC Schedule 40, 80 or 120 from the tee. The white collar center connection fits Schedule 40, 80, 120 PVC and also can be used on IPS CPVC Schedule 40 and 80 pipes. The tan collar ends fit CTS copper, PEX, CPVC or PE-RT pipe. Simply insert the slip coupling onto the...

SharkBite Stop Valve, 1/2 in Connection, PTC Connection, 200 psi, Temperature Rating: 200 deg F, Media: Portable Water, Trim Material: Stainless Steel, Softgoods Material: EPDM/Polysulfone, Body...

SharkBite Stop Valve, 1/2 in Connection, PTC Connection, 200 psi, Temperature Rating: 200 deg F, Media: Portable Water, Trim Material: Stainless Steel, Softgoods Material: EPDM/Polysulfone, Body Material: DZR Brass, Polished Chrome, Natural, Includes: Drain/Vent, Suitable for: Copper, CPVC, PEX, PE-RT, HDPE PipeUnit: EA

SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX...

SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system.Unit: EA

Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1...

Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.Unit: EA

PEX only push-fitting used to permanently transition between PEX pipe and an FNPT thread. Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods....

PEX only push-fitting used to permanently transition between PEX pipe and an FNPT thread. Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp or clamp or PEX rings, increasing productivity. Securely and permanently transition between PEX pipe and an FNPT thread. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.Unit: EA

Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits...

Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.Unit: EA

Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1...

Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.Unit: EA

Protects the valve from freezing conditions and from potential back pressure and contaminated water flowing back into the main line. Has an integrated 1/2 in push-to-connect inlet that is compatible...

Protects the valve from freezing conditions and from potential back pressure and contaminated water flowing back into the main line. Has an integrated 1/2 in push-to-connect inlet that is compatible with PEX, copper, CPVC, PE-RT and HDPE pipes and a 3/4 in garden hose outlet. The shut-off is located at the inlet of the sillcock to drain the water from the line to protect the valve in freezing conditions. Comes with an integrated vacuum breaker to prevent backflow and a mounting flange to...

A double-body strap water heater restraint kit for water heaters up to 80 gal in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8 in carriage bolts, (2) caps and...

A double-body strap water heater restraint kit for water heaters up to 80 gal in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8 in carriage bolts, (2) caps and (2) 3/8 in hex nuts. System allows for full adjustment from the front side of the water heater. Made of 24 ga CRS, galvanized material, with a protective non-scratch painted coating and protective safety cap. California Division State Architect (DSA) approval #97-010. IAPMO listed. City of Los...

The SharkBite PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either...

The SharkBite PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is FNPT threaded on the other side.Unit: EA

Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed.Unit: LGTH ...

Cross-linked polyethylene pipe approved for use in residential and commercial installations. Has the flexibility to bend around corners, reducing the number of connection points needed.Unit: LGTH

SharkBite end caps are push to connect and are the easiest way to cap off your copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great...

SharkBite end caps are push to connect and are the easiest way to cap off your copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a disconnect clip. All SharkBite fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.Unit: EA

The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply...

The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The coupler fitting ensures an easier working environment in...