Fasteners

Information on nail compatibility is available online at www.senco.com.BRIGHTSmooth ShankDia. x Lgth. In.=.113 x 2-3/8Count=2.5MPAPER COLLATED34-34 DEGREE - CLIPPEDUnit: BX25C ...

Information on nail compatibility is available online at www.senco.com.BRIGHTSmooth ShankDia. x Lgth. In.=.113 x 2-3/8Count=2.5MPAPER COLLATED34-34 DEGREE - CLIPPEDUnit: BX25C

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers,...

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn constructionand retaining walls."TIMBER-MATE"Lgth In=10 Unit: BX 50

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers,...

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn constructionand retaining walls."TIMBER-MATE"Lgth In=4 Unit: BX 50

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers,...

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn constructionand retaining walls."TIMBER-MATE"Lgth In=6 Unit: BX 50

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers,...

Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn constructionand retaining walls."TIMBER-MATE"Lgth In=8 Unit: BX 50

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat...

Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point...

Self-tapping type 17 point with high-low threads, 5/16 in zinc alloy head, 1000 hrs salt spray coating, integrated rubber washer.GALVANIZEDSize=#9 x 1-1/2Qyt=250METAL TO WOODUnit: BAG5L ...

Self-tapping type 17 point with high-low threads, 5/16 in zinc alloy head, 1000 hrs salt spray coating, integrated rubber washer.GALVANIZEDSize=#9 x 1-1/2Qyt=250METAL TO WOODUnit: BAG5L

Metal to metal sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screws have a #3 drill point and are designed for 26 ga and heavier...

Metal to metal sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screws have a #3 drill point and are designed for 26 ga and heavier metal to join laps and to stitch corner and rake trims and the ridge cap where they overlap wall steel. A 3/8 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. All screws are 1000 hr salt...

Metal-to-metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes...

Metal-to-metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4 in total thickness with no predrilling. #12-14 screws are 5/16 in across flats hex washer head and #14-14 screws are 3/8 in across flats hex...