SHARKBITE

The SharkBite push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8...

The SharkBite push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available in either straight connections or as an elbow 90 deg connection. They are also easily rotatable after installation for easy installation even in tight spaces.Unit: EA

SharkBite angle stops combine push-fit technology with an angle stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of...

SharkBite angle stops combine push-fit technology with an angle stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.Unit: EA ...

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when...

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on the hexagon area at the middle of the component.Unit: EA

The SharkBite PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite PEX barb fittings are compatible...

The SharkBite PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.Unit: EA

The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a...

The EB-45 Series is a lead-free one 1/2 cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB-45 is assembled using modular construction methods and features end connections threaded for both FIP and union in 1/2 in through 2 in sizes. The EB-45 is intended for...

Dishwasher elbows are a 90 deg fitting that connects the hot water line to the dishwasher. SharkBite dishwasher elbows enable quick and easy connection and do not require any soldering, clamps,...

Dishwasher elbows are a 90 deg fitting that connects the hot water line to the dishwasher. SharkBite dishwasher elbows enable quick and easy connection and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal.Unit: EA

Connect pieces of different sized PEX pipe together. Compatible with crimp or clamp rings. Certified for use in potable water and hydronic heating systems.Unit: EA

Connect pieces of different sized PEX pipe together. Compatible with crimp or clamp rings. Certified for use in potable water and hydronic heating systems.Unit: EA

The SharkBite PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be...

The SharkBite PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be removed and repaired. Insert the slip coupling onto the PVC pipe and use the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of the pipe, completing the connection.Unit: EA

The SharkBite PEX barb connection system is the best option for connecting PEX pipe in water distribution systems when lower material cost is desired. Robustly constructed with lead-free DZR brass,...

The SharkBite PEX barb connection system is the best option for connecting PEX pipe in water distribution systems when lower material cost is desired. Robustly constructed with lead-free DZR brass, the SharkBite barb fittings are corrosion-resistant.Unit: BAG10

The SharkBite manifolds combine SharkBite Push-To-Connect (PCT) technology with the value-added advantages of a manifold. The SharkBite manifolds are designed to simplify manifold and pipe...

The SharkBite manifolds combine SharkBite Push-To-Connect (PCT) technology with the value-added advantages of a manifold. The SharkBite manifolds are designed to simplify manifold and pipe installation in potable water or hydronic heating systems. The manifolds can connect to either copper, CPVC, PEX and PE-RT piping. Just insert the pipe and the stainless steel teeth bite down and griptight creating a watertight joint.Unit: EA

Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp/clamp/PEX rings, increasing productivity. Securely and...

Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp/clamp/PEX rings, increasing productivity. Securely and permanently connect two pieces of PEX pipe together. Can be rotated after connected and is ideal for working in tight spaces. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.Unit: EA

Connect pieces of different sized PEX pipe together. Compatible with crimp or clamp rings. Certified for use in potable water and hydronic heating systems.Unit: EA

Connect pieces of different sized PEX pipe together. Compatible with crimp or clamp rings. Certified for use in potable water and hydronic heating systems.Unit: EA

SharkBite angle stops combine push-fit technology with an angle stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of...

SharkBite angle stops combine push-fit technology with an angle stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.Unit: EA ...

Designed with a patented one piece 2.4 in Dia mounting flange and inlet connection. Ideal for replacement and new construction installations. Combines a 3/4 in garden hose outlet with a 1/2 in or...

Designed with a patented one piece 2.4 in Dia mounting flange and inlet connection. Ideal for replacement and new construction installations. Combines a 3/4 in garden hose outlet with a 1/2 in or 3/4 in push to connect inlet. Innovative push to connect design makes for quick and easy installation. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.Unit: EA

The EB75 is a compact, iron-body pressure reducing and regulating valve designed for installations where small size and economy are important. Because of the iron body, this valve is not recommended...

The EB75 is a compact, iron-body pressure reducing and regulating valve designed for installations where small size and economy are important. Because of the iron body, this valve is not recommended for use in potable water applications. The EB75 comes factory set at 45 psi but has an adjustment range of 10 to 70 psi. The valve also comes in a low-pressure range of 0-20 psi.Unit: EA

SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX...

SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system.Unit: PK6

The SharkBite PVC x MNPT adapter allows you to make a joint to Schedule 40, 80 or 120 PVC pipe using a push-fit connection and gives you a male NPT adapter on the opposite end.Unit: EA

The SharkBite PVC x MNPT adapter allows you to make a joint to Schedule 40, 80 or 120 PVC pipe using a push-fit connection and gives you a male NPT adapter on the opposite end.Unit: EA