SHARKBITE

The EB-25 SS from Cash Acme brings state-of-the-art water control technology to pressure regulators. This version of the EB-25 boasts all of the features of the original, while providing the new...

The EB-25 SS from Cash Acme brings state-of-the-art water control technology to pressure regulators. This version of the EB-25 boasts all of the features of the original, while providing the new benefit of stainless steel internals and 100% lead-free materials of construction. The EB-25 has a convenient orange pressure adjustment twist-cap and numerical indicator which makes installation a quick, one-man job. The unique design also eliminates the water whistle or hum associated with most PRVs,...

The female connector is from the Speedfit secure range of fittings that ensure a secure connection when adapting Speedfit pipe or copper to threaded applications. To lock pipe in place, push the...

The female connector is from the Speedfit secure range of fittings that ensure a secure connection when adapting Speedfit pipe or copper to threaded applications. To lock pipe in place, push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.Unit: EA

Used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home....

Used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. Typically used on stub-outs coming out of the wall. Certified for use in potable water systems.Unit: EA

Typically used on stub-outs coming out of the wall. Used to control and shut-off water flow to fixtures or appliances for maintenance and repair. Innovative design with 1/2 in push-to-connect inlet...

Typically used on stub-outs coming out of the wall. Used to control and shut-off water flow to fixtures or appliances for maintenance and repair. Innovative design with 1/2 in push-to-connect inlet makes for quick installation and quarter-turn full-port brass ball valve makes for easy operation. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.Unit: EA

SharkBite Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, 200 psi, Operating Temperature: 200 deg F, Brass/Polybutylene, Suitable for: PEX, Copper, CPVC, PE-RT and HDPE PipesUnit: EA

SharkBite Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, 200 psi, Operating Temperature: 200 deg F, Brass/Polybutylene, Suitable for: PEX, Copper, CPVC, PE-RT and HDPE PipesUnit: EA

SharkBite 22441LF water heater kit 3/4 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the...

SharkBite 22441LF water heater kit 3/4 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the user to connect a water distribution pipe with ease. This product is lead free.Unit: EA

Traditionally used in PEX systems, the SharkBite multi-port tee allows for easy connection into PEX, copper or CPVC systems. Innovative push-to-connect design makes for quick and easy installation....

Traditionally used in PEX systems, the SharkBite multi-port tee allows for easy connection into PEX, copper or CPVC systems. Innovative push-to-connect design makes for quick and easy installation. No special tools, crimping, glue or soldering required, improving install efficiencies and reducing the risk of installation errors. Minimizes the risk of leaks by eliminating excess connection points. All manifolds have a 1 in trunk with 3/4 in push-to-connect inlets and 1/2 in push-to-connect...

SharkBite elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple...

SharkBite elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall)...

Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Designed with a patented one-piece 2.4 in Dia mounting flange and inlet connection. Ideal for replacement and new...

Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Designed with a patented one-piece 2.4 in Dia mounting flange and inlet connection. Ideal for replacement and new construction installations. Combines a 3/4 in garden hose outlet with a 1/2 or 3/4 in push-to-connect inlet at a 45 deg angle to prevent hose kinks. Innovative push-to-connect design makes for quick and easy installation. Ideal for working in tight spaces. Faster install time and ease of use reduces...

SharkBite® straight stops combine push-fit technology with a straight stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off...

SharkBite® straight stops combine push-fit technology with a straight stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.Unit:...

Cash Acme Vacuum Breaker, 3/4 in Connection, Female x Male Connection, Inlet Connection Size: 3/4 in, Maximum Working Temperature: 180 deg F, Maximum Pressure: 125 psi, BrassUnit: EA

Cash Acme Vacuum Breaker, 3/4 in Connection, Female x Male Connection, Inlet Connection Size: 3/4 in, Maximum Working Temperature: 180 deg F, Maximum Pressure: 125 psi, BrassUnit: EA

SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX...

SharkBite EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite PEX pipe as a holistic system.Unit: EA

Unit: EA

Unit: EA

Speedfit secure fittings manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC pipe....

Speedfit secure fittings manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC pipe. Approved for behind the wall installation.Unit: EA

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications.Unit: EA

Hy-Ear elbows are used to transition from copper, PEX, CPVC or PE-RT to threaded pipe. They are similar to female elbows, but have mounting ears with holes for securing to a surface (typically an...

Hy-Ear elbows are used to transition from copper, PEX, CPVC or PE-RT to threaded pipe. They are similar to female elbows, but have mounting ears with holes for securing to a surface (typically an overhead surface such as a ceiling) and they provide additional stability. SharkBite Hy-Ear elbows do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to...

Reliance Worldwide Braided Faucet Connector, Inlet Connection Size: 1/2 in, Outlet Connection Size: 1/2 in, Flexible/Rigid: Flexible, Tubing Material: Stainless Steel, 20 in LUnit: EA

Reliance Worldwide Braided Faucet Connector, Inlet Connection Size: 1/2 in, Outlet Connection Size: 1/2 in, Flexible/Rigid: Flexible, Tubing Material: Stainless Steel, 20 in LUnit: EA

The SharkBite PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be...

The SharkBite PVC x PVC slip coupling is a repair coupling that allows you to make a quick and easy repair on PVC pipe (SCH 40, 80 and 120.) The slip coupling allows up to 2 in of damaged pipe to be removed and repaired. Insert the slip coupling onto the PVC pipe and use the PVC depth gauge and disconnect clip to slip the fitting back onto the other end of the pipe, completing the connection.Unit: EA

SharkBite female elbows are FNPT on one end and push-to-connect on the opposite end. These fittings allow the user to make a 90 deg connection to copper, PEX, CPVC or PE-RT pipes. This fitting is...

SharkBite female elbows are FNPT on one end and push-to-connect on the opposite end. These fittings allow the user to make a 90 deg connection to copper, PEX, CPVC or PE-RT pipes. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.Unit: EA

Includes two SharkBite push connect angle stop, two connectors and two 1/4 x 5 ft PEX tubing.Unit: EA

Includes two SharkBite push connect angle stop, two connectors and two 1/4 x 5 ft PEX tubing.Unit: EA

Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp/clamp/PEX rings, increasing productivity. Securely and...

Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp/clamp/PEX rings, increasing productivity. Securely and permanently connect two pieces of PEX pipe together. Can be rotated after connected and is ideal for working in tight spaces. Green visual indicator lets you know when PEX tubing is inserted to the proper depth and reduces the risk of installation errors.Unit: PK6

John Guest Pipe Connector, Nominal Size: 3/4 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX PipeUnit: BAG5

John Guest Pipe Connector, Nominal Size: 3/4 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX PipeUnit: BAG5

The SharkBite PVC x MNPT adapter allows you to make a joint to Schedule 40, 80 or 120 PVC pipe using a push-fit connection and gives you a male NPT adapter on the opposite end.Unit: EA

The SharkBite PVC x MNPT adapter allows you to make a joint to Schedule 40, 80 or 120 PVC pipe using a push-fit connection and gives you a male NPT adapter on the opposite end.Unit: EA

The SharkBite PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a...

The SharkBite PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is MNPT threaded on the other side.Unit: EA