CARLON

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to...

For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed.Unit: EA

Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box.Unit: EA

Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box.Unit: EA

Carlon Conduit Adapter, 2 in Trade, Male Connection, PVC, Gray, 2.09 in Length, 2.71 in Diameter, Suitable for: SCH 40 and 80 ConduitsUnit: EA

Carlon Conduit Adapter, 2 in Trade, Male Connection, PVC, Gray, 2.09 in Length, 2.71 in Diameter, Suitable for: SCH 40 and 80 ConduitsUnit: EA

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With...

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.Unit: EA

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as...

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as described in the National Electrical Code.Unit: EA

Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed.Unit: EA

Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.Unit: EA

The Carlon SuperBlue hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially...

The Carlon SuperBlue hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon SuperBlue boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wirefill capacity in their class and come with molded-in...

For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cu-in capacity.Unit: EA

For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cu-in capacity.Unit: EA

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial...

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA

Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cu-in capacity. UL listed.Unit: EA

Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cu-in capacity. UL listed.Unit: EA

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.Unit: EA

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.Unit: EA

The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy...

The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp-opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

Carlon Conduit, Flexible, Trade Size: 3/4 in, PVC, 6 ft LUnit: EA

Carlon Conduit, Flexible, Trade Size: 3/4 in, PVC, 6 ft LUnit: EA

Old work wall case. Safe, non-conductive. Two zip-mount retainers. Four integral clamps, two each end, mounting ears. 14 cu-in, 2-3/4 in x 2-1/4 in x 4-1/8 in. UL listed.Unit: EA

Old work wall case. Safe, non-conductive. Two zip-mount retainers. Four integral clamps, two each end, mounting ears. 14 cu-in, 2-3/4 in x 2-1/4 in x 4-1/8 in. UL listed.Unit: EA

Carlon Conduit Adapter, 1 in Trade, Female Connection, PVC, Gray, 1-15/16 in Length, 1-5/8 in Diameter, Suitable for: SCH 40 and 80 ConduitsUnit: EA

Carlon Conduit Adapter, 1 in Trade, Female Connection, PVC, Gray, 1-15/16 in Length, 1-5/8 in Diameter, Suitable for: SCH 40 and 80 ConduitsUnit: EA

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

Safe, non-conductive. SCH 40 non-metallic socket type coupling for joining SCH 40 non-metallic conduit. Will not rust or corrode. RoHS compliance, UL listed.Unit: EA

Safe, non-conductive. SCH 40 non-metallic socket type coupling for joining SCH 40 non-metallic conduit. Will not rust or corrode. RoHS compliance, UL listed.Unit: EA

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA