CARLON

CANTEX 5133823 is a 1/2 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg.Unit: EA

CANTEX 5133823 is a 1/2 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg.Unit: EA

For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.Unit: EA

For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.Unit: EA

Carlon's Snap Strap offers a unique support strap designed especially for the installation of PVC conduit. Also suitable for installations of rigid steel. This high-strength, non-metallic clamp...

Carlon's Snap Strap offers a unique support strap designed especially for the installation of PVC conduit. Also suitable for installations of rigid steel. This high-strength, non-metallic clamp allows conduit to expand and contract freely, eliminating the bowing commonly seen from the expansion and contraction of conduit caused by varying temperature changes. Finished installations have a neat, attractive appearance on exposed applications.Unit: EA

Non-metallic. Non-conductive. Suitable for masonry walls. 4 in x 4 in x 1-1/2 in. 1/2 in and 3/4 in knockouts. UL listed.Unit: EA

Non-metallic. Non-conductive. Suitable for masonry walls. 4 in x 4 in x 1-1/2 in. 1/2 in and 3/4 in knockouts. UL listed.Unit: EA

CANTEX 5133826 is a 1-1/4 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg.Unit: EA

CANTEX 5133826 is a 1-1/4 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg.Unit: EA

Carlon Conduit Coupling, 3/4 in Trade, Socket Connection, PVCUnit: EA

Carlon Conduit Coupling, 3/4 in Trade, Socket Connection, PVCUnit: EA

Non-conductive. Will not rust or corrode.Unit: EA

Non-conductive. Will not rust or corrode.Unit: EA

For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.Unit: EA

For flexible conduit. Non-metallic, non-conductive, corrosion-resistant plastic.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With...

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL listed, RoHS Compliance.Unit: EA

Carlon Conduit Body, Rigid, 12 cu-in, PVC, 6-9/32 in Overall Length, 2-1/32 in Overall WidthUnit: EA

Carlon Conduit Body, Rigid, 12 cu-in, PVC, 6-9/32 in Overall Length, 2-1/32 in Overall WidthUnit: EA

Drill 5/16 in hole with masonry bit and tap in with hammer.Unit: BAG 5

Drill 5/16 in hole with masonry bit and tap in with hammer.Unit: BAG 5

With captive nails. 18 cu-in volume. Listed for fixture support up to 50 lb. 3 in Dia x 2-3/4 in D. Meets NEMA OS-2, UL listed.Unit: EA

With captive nails. 18 cu-in volume. Listed for fixture support up to 50 lb. 3 in Dia x 2-3/4 in D. Meets NEMA OS-2, UL listed.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Sch 40, 3" x 36" in length. 90 degree angle. Manufactured to NEMA TC-2, Federal...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Sch 40, 3" x 36" in length. 90 degree angle. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial...

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section...

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

Carlon Ceiling Box, Clamp Cable Entry, 20 cu-in, Round Shape, Polycarbonate, Blue, 4 in Width, 4 in Depth, 2-1/4 in Height, Captive Nail Mounting, Includes: Ground Lug and ScrewUnit: EA

Carlon Ceiling Box, Clamp Cable Entry, 20 cu-in, Round Shape, Polycarbonate, Blue, 4 in Width, 4 in Depth, 2-1/4 in Height, Captive Nail Mounting, Includes: Ground Lug and ScrewUnit: EA

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing...

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit.Size In=3/4PVC/NON-METALLICTWO HOLESUnit: PK 5

Carlon Switch Box, 1/2 in Hub, 2 Outlets, 2 Gangs, Square Shape, 32 cu-in, Dimensions: 4.62 in L x 4.62 in W x 1.98 in H, PVC, GrayUnit: EA

Carlon Switch Box, 1/2 in Hub, 2 Outlets, 2 Gangs, Square Shape, 32 cu-in, Dimensions: 4.62 in L x 4.62 in W x 1.98 in H, PVC, GrayUnit: EA

New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed.Unit: EA

New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy...

The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp-opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier...

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With...

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL listed, RoHS Compliance.Unit: EA