CARLON

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.Unit: EA

Carlon Standard Coupling, 2-1/2 in Trade, PVC, Gray, 3-3/16 in Length, 2.688 in ID x 3.3125 in OD Diameter, Includes: (7) Standard CouplingsUnit: EA

Carlon Standard Coupling, 2-1/2 in Trade, PVC, Gray, 3-3/16 in Length, 2.688 in ID x 3.3125 in OD Diameter, Includes: (7) Standard CouplingsUnit: EA

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.Unit: EA ...

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.Unit: EA

Non-metallic sheathed cable clamps. Ceiling box with 14 -1/4 in - 23-1/2 in adjustable bar hanger. Fixture spacing for 2-3/4 in and 3-1/2 in. 4 in Dia x 2-1/4 in D. Ground lug and screw. 6 integral...

Non-metallic sheathed cable clamps. Ceiling box with 14 -1/4 in - 23-1/2 in adjustable bar hanger. Fixture spacing for 2-3/4 in and 3-1/2 in. 4 in Dia x 2-1/4 in D. Ground lug and screw. 6 integral clamps. Listed for fixture support up to 50 lb. UL listed, meets NEMA OS-2.Unit: EA

For dead-end terminations where two devices or additional wiring capacity is required. Safe, non-conductive, will not rust or corrode. Integral mounting feet provide easy mounting. Type 2FSE. 32...

For dead-end terminations where two devices or additional wiring capacity is required. Safe, non-conductive, will not rust or corrode. Integral mounting feet provide easy mounting. Type 2FSE. 32 cu-in capacity. UL listed.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.Unit: EA

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.Unit: EA

For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.Unit: EA

For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18 in D x 2.18 in x 3.05 in.Unit: EA

For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18 in D x 2.18 in x 3.05 in.Unit: EA

Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed.Cu In Cap=55THREE GANGOLD WORKUnit: EA ...

Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed.Cu In Cap=55THREE GANGOLD WORKUnit: EA

Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cu-in capacity. UL listed.Unit: EA

Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cu-in capacity. UL listed.Unit: EA

Liquidtight flexible non-metallic conduit provides great wire protection in harsh, damp environments. Carflex conduit is non-conductive, non-corrosive and resistant to oil, acid, ozone and alkaline....

Liquidtight flexible non-metallic conduit provides great wire protection in harsh, damp environments. Carflex conduit is non-conductive, non-corrosive and resistant to oil, acid, ozone and alkaline. Carflex conduit is strong and lightweight and, because it weighs 50% less than metallic systems, it's easy to handle, transport and install. Carflex is ideal for industrial, air conditioning, heating and outdoor lighting applications.Unit: COIL

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing...

Offers same chemical resistance as carbon non-metallic conduit for a complete, corrosion-resistant system. UV-resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts and 2 washers. Gray clamps for standard conduit.Unit: PK 5

Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed.Unit: EA

Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed.Unit: EA

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.Unit: EA ...

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.Unit: EA

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed,...

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial...

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section...

Carlon Conduit Coupling, 1/2 in Trade, Socket Connection, PVC, Gray, 1-1/2 in Length, 0.728 in ID x 1.109375 in OD Diameter, Suitable for: SCH 40 and 80 ConduitsUnit: PK 10

Carlon Conduit Coupling, 1/2 in Trade, Socket Connection, PVC, Gray, 1-1/2 in Length, 0.728 in ID x 1.109375 in OD Diameter, Suitable for: SCH 40 and 80 ConduitsUnit: PK 10

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as...

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as described in the National Electrical Code.Unit: EA

Carlon Slip Meter Riser, NPS Connection, PVC, Gray, Dimensions: 2.961 in Dia x 24 in L, Suitable for: SCH 40 and 80 ConduitsUnit: EA

Carlon Slip Meter Riser, NPS Connection, PVC, Gray, Dimensions: 2.961 in Dia x 24 in L, Suitable for: SCH 40 and 80 ConduitsUnit: EA