B & K INDUSTRIES

-20 to 300 deg F temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow,...

-20 to 300 deg F temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 psig), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1.Size In=3/8PSI=200BRASSFIP X FIPUnit: EA

B & K Pipe Nipple, Nominal Size: 3 in, Threaded Connection, Schedule Rating: SCH 40, Steel, 12 in LSize In=3 x 12STEEL - STANDARDUnit: EA

B & K Pipe Nipple, Nominal Size: 3 in, Threaded Connection, Schedule Rating: SCH 40, Steel, 12 in LSize In=3 x 12STEEL - STANDARDUnit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.Size In=1/2MALLEABLE IRON 90 DEGREE SIDE OUTLET ELBOWUnit: EA ...

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.Size In=1/2MALLEABLE IRON 90 DEGREE SIDE OUTLET ELBOWUnit: EA

-20 to 300 deg F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF...

-20 to 300 deg F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.FIP In=1PSI=600LEAD FREE BRASSSWEAT X SWEATHEAVY DUTYUnit: EA

Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment...

Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No R400-1/2 12 gpm at 35 psi, 22 gpm at 85 psi. No R400-3/4 21 gpm at 35 psi, 39.9 gpm at 85 psi.Pipe Size...

ProBite's lead-free push connectΓäó stop end connectors are easy to install and easy to remove. Using Push ConnectΓäó technology, our stop ends can be installed in seconds without the use of glues,...

ProBite's lead-free push connectΓäó stop end connectors are easy to install and easy to remove. Using Push ConnectΓäó technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems or any application where the flow of water might need to be interrupted. ProBite's lead-free push connectΓäó stop ends are great for direct or indirect cold water systems, unvented and vented hot water systems and...

400 psi WOG, 160 psi at 73 deg F, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections...

400 psi WOG, 160 psi at 73 deg F, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G.Size In=3/8BRASS - FULL PORTPEX CONNECTIONUnit: EA

B&K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply...

B&K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling.Size In=1/2POLYPROPYLENEU...

60 psi non-shock hot water. 15 psi WSP. Hot water or low pressure systems.Size In=1/2Unit: EA

60 psi non-shock hot water. 15 psi WSP. Hot water or low pressure systems.Size In=1/2Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Size In=3 x 2MALLEABLE IRON HEX BUSHINGUnit: EA ...

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Size In=3 x 2MALLEABLE IRON HEX BUSHINGUnit: EA

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily...

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.PC x FNPT In=1/2 x 1/2DROP EAR ELBOWLEAD FREE BRASSUnit: EA

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In =1-1/26" CLAMPTWO BOLTSUnit: EA ...

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In =1-1/26" CLAMPTWO BOLTSUnit: EA

B & K ProLine 6700CTS Ball Valve, 1/2 in Connection, Slip x Slip Connection, Port Type: Full, 100 psi, Schedule Rating: SCH 40, Temperature Rating: 180 deg F, Media: Water, Softgoods Material: EPDM,...

B & K ProLine 6700CTS Ball Valve, 1/2 in Connection, Slip x Slip Connection, Port Type: Full, 100 psi, Schedule Rating: SCH 40, Temperature Rating: 180 deg F, Media: Water, Softgoods Material: EPDM, PTFE, Body Material: CPVC, WhiteSize In=1/2PSI=100CPVCSOLVENT WELDUnit: EA

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Fits any 3/4 in hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent...

Fits any 3/4 in hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7, ASSE 1019 approved, UPC, Canadian UPC approved.UPC CodedBRASS - FEMALE X MALEUnit: EA

Mueller 1-Bolt Pipe Repair Clamp, Nominal Opening Size: 1/2 in, Working Pressure: 150 psi, Temperature Rating: 167 deg F, 3 in L, 430 Stainless SteelSize In=1/23" CLAMPSINGLE BOLTUnit: EA ...

Mueller 1-Bolt Pipe Repair Clamp, Nominal Opening Size: 1/2 in, Working Pressure: 150 psi, Temperature Rating: 167 deg F, 3 in L, 430 Stainless SteelSize In=1/23" CLAMPSINGLE BOLTUnit: EA

3/4 in hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.MPT\In=1/2PSI=125BRASSMPT X GHTUnit: EA ...

3/4 in hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.MPT\In=1/2PSI=125BRASSMPT X GHTUnit: EA

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.Size In=1/2PSI=150PVCFPT x FPTUnit: EA ...

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.Size In=1/2PSI=150PVCFPT x FPTUnit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Size In=4 x 2MALLEABLE IRON HEX BUSHINGUnit: EA ...

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.Size In=4 x 2MALLEABLE IRON HEX BUSHINGUnit: EA

Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.Size In =3/4BRASSFIP X SOLDERUnit: EA

Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.Size In =3/4BRASSFIP X SOLDERUnit: EA

Brass body and nut, rubber gaskets. Rated up to 125 psi at 210 deg F.NO LEADIPS-CTS In=3/4 & 1BRASSDUAL SIZE IPS & CTSUnit: EA

Brass body and nut, rubber gaskets. Rated up to 125 psi at 210 deg F.NO LEADIPS-CTS In=3/4 & 1BRASSDUAL SIZE IPS & CTSUnit: EA

3/4 in hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.Pex x Pex In=1/2PSI=125BRASSUnit: EA

3/4 in hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.Pex x Pex In=1/2PSI=125BRASSUnit: EA

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G.Sweat In=3/4PSI=125LEAD-FREE...

Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G.Sweat In=3/4PSI=125LEAD-FREE BRASSSWEAT X SWEATUnit: EA