B & K INDUSTRIES

200 psi WOG, -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 psia, IAPMO listed to CUPC, certified to NSF...

200 psi WOG, -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 psia, IAPMO listed to CUPC, certified to NSF 61-G.Unit: EA

Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.Unit: EA ...

Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.Unit: EA

1/2 in MIP & 1/2 in Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut-off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water...

1/2 in MIP & 1/2 in Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut-off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4 in hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7. Solder ends comply with ANSI B16.18....

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Unit: EA

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Unit: EA

ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings...

ProBite's lead-free straight couplings are the answer for a fast, leak-free pipe installation. Installable in seconds without requiring glues, solder or flux, our lead-free straight couplings provide solid connections on PEX, CPVC or copper pipe.Unit: EA

Brass body and nut, rubber gaskets. Rated up to 125 psi at 210 deg F.Unit: EA

Brass body and nut, rubber gaskets. Rated up to 125 psi at 210 deg F.Unit: EA

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

CPVC construction. For use with hot or cold water. Rated for 100 psi at 180 deg F. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with...

CPVC construction. For use with hot or cold water. Rated for 100 psi at 180 deg F. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.Unit: EA

1/2 in MIP x 1/2 in Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4 in hose thread outlet,...

1/2 in MIP x 1/2 in Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4 in hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC coded. Bulk handy carton.Unit: EA

3-3/8 in centers, code pattern has gooseneck spout. Replaceable seats and stems. 3/4 in IPS inlets.Unit: EA

3-3/8 in centers, code pattern has gooseneck spout. Replaceable seats and stems. 3/4 in IPS inlets.Unit: EA

B & K Transition Pipe Adapter, Nominal Size: 1/2 in, Solvent x MIP Connection, Brass/CPVCUnit: EA

B & K Transition Pipe Adapter, Nominal Size: 1/2 in, Solvent x MIP Connection, Brass/CPVCUnit: EA

ProBite's lead-free reducing coupling connects copper, CPVC and PEX tubing in any combination, for long-lasting full flow connections. Easy to install, easy to remove, reusable, long-lasting and...

ProBite's lead-free reducing coupling connects copper, CPVC and PEX tubing in any combination, for long-lasting full flow connections. Easy to install, easy to remove, reusable, long-lasting and backed by a 75 years warranty.Unit: EA

Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to...

Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G.Unit: EA

Brass locknut, rubber washer.Unit: EA

Brass locknut, rubber washer.Unit: EA

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.Unit: EA

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.Unit: EA

Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose...

Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats and rust-resistant handle. 125 psi max working pressure. 3/4 in hose thread outlet. IAPMO NSI/NSF 61 approved. Pipe threads comply with ANSI B1.20.1, hose threads comply with...

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.Unit: EA

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.Unit: EA

-40 to 194 deg F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to...

-40 to 194 deg F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.Unit: EA

Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air...

Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.Unit: EA

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

200 psi water, oil or gas. 1/4-turn operation. Large flow rate. Chrome-plated brass ball. 3/4 in hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded...

200 psi water, oil or gas. 1/4-turn operation. Large flow rate. Chrome-plated brass ball. 3/4 in hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk.Unit: EA

1/2 in FIP x 18 in.Unit: EA

1/2 in FIP x 18 in.Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.Unit: EA

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.Unit: EA

Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.Unit: EA

Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.Unit: EA