B & K INDUSTRIES

200 psi WOG, -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 psia, IAPMO listed to CUPC, certified to NSF...

200 psi WOG, -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 psia, IAPMO listed to CUPC, certified to NSF 61-G.Size In=1/2PSI=200LEAD FREE BRASSCOMP X COMPUnit: EA

Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air...

Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.LONG LEVER HANDLEFIP Inches=1-1/4LEVER HANDLE - FIP X FIPQUARTER...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In =1/26" CLAMPTWO BOLTSUnit: EA ...

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In =1/26" CLAMPTWO BOLTSUnit: EA

Spring loaded poppet, O-ring seal.IPS In=1-1/2BARONZEIN-LINEUnit: EA

Spring loaded poppet, O-ring seal.IPS In=1-1/2BARONZEIN-LINEUnit: EA

Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. Specification, solder ends comply with ANSI B16.18, certified to...

Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. Specification, solder ends comply with ANSI B16.18, certified to NSF 61-G.PROFPT In=1PSI=300LEAD FREE BRASSFPT x FPTUnit: EA

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.IPS...

Rated for 150 psi at 73 deg F, for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.IPS In=1-1/4IPSSCHEDULE 80Unit: EA

Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.LEAD FREEFPT x FPT...

Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.LEAD FREEFPT x FPT In=3/4PSI=125FIP X FIPLEAD FREE BRASSUnit: EA

B & K Radiator Steam Vent, Straight, Brass, Dimensions: 1/8 inSize In=1/8STRAIGHTUnit: EA

B & K Radiator Steam Vent, Straight, Brass, Dimensions: 1/8 inSize In=1/8STRAIGHTUnit: EA

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.LEAD FREEFIP In=1PSI=200BRASS - STANDARDFIP X FIPUnit: EA ...

Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.LEAD FREEFIP In=1PSI=200BRASS - STANDARDFIP X FIPUnit: EA

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In=23" CLAMPSINGLE BOLTUnit: EA ...

Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature -167 deg F. Rated up to 150 psi.Size In=23" CLAMPSINGLE BOLTUnit: EA

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.Size In=1PSI=150PVCFPT x FPTUnit: EA ...

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.Size In=1PSI=150PVCFPT x FPTUnit: EA

For use with water or oil, multi-turn operation, 3/4 in hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.FIP In=3/4PSI=125BRASS - NO KINKFIP X...

For use with water or oil, multi-turn operation, 3/4 in hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.FIP In=3/4PSI=125BRASS - NO KINKFIP X GHTUnit: EA

Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings.Solv x Solv=1-1/2 x1-1/2SCHEDULE 80- PVCSOLVENT ENDSUnit: EA ...

Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings.Solv x Solv=1-1/2 x1-1/2SCHEDULE 80- PVCSOLVENT ENDSUnit: EA

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support...

Certified to NSF 61 requirements.FPT In=1/2PSI=200LEAD FREE BRASSFPT x FPTUnit: EA

Certified to NSF 61 requirements.FPT In=1/2PSI=200LEAD FREE BRASSFPT x FPTUnit: EA

B & K Plate Connector, Malleable Iron, GalvanizedSize In=3/8GALVANIZED MALLEABLE IRONUnit: EA

B & K Plate Connector, Malleable Iron, GalvanizedSize In=3/8GALVANIZED MALLEABLE IRONUnit: EA

1/2 in MPT and PEX connection. Easy quarter turn operation. IAPMO ANSI/NSF-61 approved. Maximum 125 psi working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction....

1/2 in MPT and PEX connection. Easy quarter turn operation. IAPMO ANSI/NSF-61 approved. Maximum 125 psi working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4 in hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton."QUARTER MASTER"Lgth In=4CHROME-PLATED BRASS - FROST-FREEANTI-SIPHONPEX CONNECTIONUnit: EA ...

Low pressure steam or circulated, hot water systems. 15 psi, WSP steam, Adjustable backing. Rising stem, heat resistant handle wheel.Size In=3/4ANGLE STEMUnit: EA

Low pressure steam or circulated, hot water systems. 15 psi, WSP steam, Adjustable backing. Rising stem, heat resistant handle wheel.Size In=3/4ANGLE STEMUnit: EA

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily...

Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.PC x Elbow In=3/4 x 3/4ELBOWLEAD FREE BRASSUnit: EA

Southland Supply Line Stop Valve, 3/8 x 3/8 in Connection, Compression x FIP Connection, Number of Ports/Ways: 2, 125 psi, Media: Water, Body Material: Brass, ChromeSize In=3/8PSI=125STRAIGHT - FIP...

Southland Supply Line Stop Valve, 3/8 x 3/8 in Connection, Compression x FIP Connection, Number of Ports/Ways: 2, 125 psi, Media: Water, Body Material: Brass, ChromeSize In=3/8PSI=125STRAIGHT - FIP X COMPCHROME PLATED LEAD FREE BRASSQUARTER TURNUnit: EA