WAYNE PUMPS

1/3 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates...

1/3 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion-resistant, thermoplastic pump base. Fully submersible. 1/3 hp max flow rate is 3600 gph at 0 ft. 1 1/2 NPT discharge. For use in 11 in Dia or larger sump basins.Unit: EA

Designed for residential and light commercial sewage applications. Ideal for basement- or below-grade installations. Maximum pumping capacity of 7680 gph. Cast iron motor and pump housing. Automatic...

Designed for residential and light commercial sewage applications. Ideal for basement- or below-grade installations. Maximum pumping capacity of 7680 gph. Cast iron motor and pump housing. Automatic operation with replaceable piggyback tether float switch. 2 in discharge and capable of handling 2 in NPT solids. Designed for 18 in Dia or larger basins.Unit: EA

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC1, 12 V transfer pump is convenient when normal power is not readily available. Typical...

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC1, 12 V transfer pump is convenient when normal power is not readily available. Typical applications include removing water from pool covers, clogged drains, stock tanks, water basins, boats, cisterns, etc.Unit: EA

1/2 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design...

1/2 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion-resistant, thermoplastic pump base. Fully submersible. 1/2 hp, max flow rate is 3900 at 0 ft 1-1/2 in NPT discharge. For use in 11 in. diameter or larger sump basins.Unit: EA

1/3 hp reinforced thermoplastic submersible multi-use pump.Unit: EA

1/3 hp reinforced thermoplastic submersible multi-use pump.Unit: EA

Wayne Jet Pump, 3/4 in Connection, NPT Connection, 120/240 V, 1 hp, 1056 gph, 30 to 50 psi, Motor Type: Oil-Filled, Split Phase, Maximum Head: 90 ft, Number of Stages: 1, Cast IronUnit: EA

Wayne Jet Pump, 3/4 in Connection, NPT Connection, 120/240 V, 1 hp, 1056 gph, 30 to 50 psi, Motor Type: Oil-Filled, Split Phase, Maximum Head: 90 ft, Number of Stages: 1, Cast IronUnit: EA

For SSF33, SSF50, CDU790 and CDU800 models.Unit: CD

For SSF33, SSF50, CDU790 and CDU800 models.Unit: CD

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC2, 120 V transfer pump is great for household usage. Typical applications include removing...

These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC2, 120 V transfer pump is great for household usage. Typical applications include removing water from waterbeds, clogged sinks, basements and more. Do not use PC2 in pool areas. The motors on both models PC1 and PC2 are non-submersible.Unit: EA

For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 psi) and miscellaneous applications for gases and liquids which are not...

For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 psi) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4 in FNPTF connection 1 hp at 120/240 VAC, 1-, 2-, 3-phase. 1/4 hp at 32 VDC. Carded.Unit: EA

Wayne Battery Backup Sump Pump with Automatic Switch, 48 gpm, Maximum Lift Head: 15 ft, Outlet Connection Size: 1-1/2 in, 12 VDC, Cord Length: 8 ft, Impeller Material: Thermoplastic, Housing...

Wayne Battery Backup Sump Pump with Automatic Switch, 48 gpm, Maximum Lift Head: 15 ft, Outlet Connection Size: 1-1/2 in, 12 VDC, Cord Length: 8 ft, Impeller Material: Thermoplastic, Housing Material: Steel/Cast Iron, Installation Type: Submersible, Includes: Protective Battery CaseUnit: EA

1-1/2 in pump thread with 1-1/4 in or 1-1/2 in pipe connection.Unit: EA

1-1/2 in pump thread with 1-1/4 in or 1-1/2 in pipe connection.Unit: EA

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A...

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A built-in control valve is available on deep well pumps. Deep well pumps can be mounted to either a pre-charged, conventional type or free- standing pressure tank.Unit: EA

The Wayne WWB WaterBUG submersible water removal pump with multi-flow technology, is the tool for you, our patent pending multi-flo technology is key and allows the user, easy selection of the...

The Wayne WWB WaterBUG submersible water removal pump with multi-flow technology, is the tool for you, our patent pending multi-flo technology is key and allows the user, easy selection of the appropriate discharge for the water removal application. The top discharge should be used to drain water from confined spaces, a window well, laundry tub, even from 5 gal buckets. Side discharge should be selected for easy water removal from open areas, flat roofs, flooded basements, shower stalls,...

This portable, submersible utility pump is designed for non-automatic use in water. The units are equipped with a 9 ft. 3-prong grounding type power cord. The discharge fitting is designed for...

This portable, submersible utility pump is designed for non-automatic use in water. The units are equipped with a 9 ft. 3-prong grounding type power cord. The discharge fitting is designed for convenient attachment to a garden hose, in a temporary application.Unit: EA

1/2 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and...

1/2 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron base. Fully submersible. 1/2 hp, max flow rate is 4200 gph at 0 ft 1-1/2 in NPT discharge. For use in 11 in Dia or larger sump basins. 9 in ON level and 4 in OFF level.Unit: EA

Includes 2 convertible fittings and 4 hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4 in or 1-1/2 in OD pipe.Unit: EA ...

Includes 2 convertible fittings and 4 hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4 in or 1-1/2 in OD pipe.Unit: EA

1/3 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks...

1/3 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron pump base. Fully submersible. 1/3 hp, max flow rate is 3800 gph at 0 ft 1-1/2 in. NPT discharge. For use in 11 in. diameter or larger sump basins, 9 in ON level and 4 in OFF level.Unit: EA

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A...

Jet pumps are single-stage domestic water pumps designed for pumping potable water in applications where the water is up to 100 ft below pump center line. A pressure switch is a standard feature. A built-in control valve is available on deep well pumps. Deep well pumps can be mounted to either a pre-charged, conventional type or free- standing pressure tank.Unit: EA

3/4 hp cast iron and stainless steel submersible sump pump. Assembled in the US with foreign and domestic parts. Top suction design eliminates air locks and clogging from debris in bottom of sump...

3/4 hp cast iron and stainless steel submersible sump pump. Assembled in the US with foreign and domestic parts. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Stainless steel motor housing and rugged, cast iron pump base. Fully submersible. 3/4 hp, max flow rate is 4600 gph at 0 ft 1-1/12 in NPT discharge. For use in 11 in Dia or larger sump basins. 9 in ON level and 4 in OFF level.Unit: EA

1/2 hp cast iron submersible sewage pump. Maximum flow rate is 4800 gph at 0 ft. Durable, cast iron submersible sewage pump. Size of 2 in. NPT discharge capable of handling up to 2 in. solids. Ideal...

1/2 hp cast iron submersible sewage pump. Maximum flow rate is 4800 gph at 0 ft. Durable, cast iron submersible sewage pump. Size of 2 in. NPT discharge capable of handling up to 2 in. solids. Ideal for basement- or below-grade installations.Unit: EA