TRU-FLATE

Regulates air pressure from compressor to match the recommended air pressure required by air tools.Unit: CD

Regulates air pressure from compressor to match the recommended air pressure required by air tools.Unit: CD

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.Unit: EA

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.Unit: EA

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.Unit: EA

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.Unit: EA

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.Unit: EA

All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.Unit: EA

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA)...

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.Unit: EA

PLEWS/EDELMANN Tire Gauge, 20 to 120 psi, Includes: (4) Standard Valve CapsUnit: CD

PLEWS/EDELMANN Tire Gauge, 20 to 120 psi, Includes: (4) Standard Valve CapsUnit: CD

Adjust from low air to a full volume flow. Recommended air pressure to 150 psi maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all industrial/Milton design 1/4 in...

Adjust from low air to a full volume flow. Recommended air pressure to 150 psi maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all industrial/Milton design 1/4 in coupler bodies.Unit: EA

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA)...

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.Unit: CD

Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one-piece nozzle. Allows full line pressure to be used. Includes 1/4 in female NPT inlet. To comply with...

Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one-piece nozzle. Allows full line pressure to be used. Includes 1/4 in female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 psi.Unit: EA

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider...

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.Unit:...

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball...

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.Unit: EA

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA)...

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.Unit: EA

All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or...

All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.Unit: CD

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the...

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.Unit: EA

Professional type dial in a drawn steel casing with a nickel plated brass chuck. Easy-to-read dial calibrated 10 to 60 psi in 1 lb increments. Automatic reset, pressure release valve. Use for...

Professional type dial in a drawn steel casing with a nickel plated brass chuck. Easy-to-read dial calibrated 10 to 60 psi in 1 lb increments. Automatic reset, pressure release valve. Use for passenger cars, vans and light trucks.Unit: EA

Compact, lightweight design with gauge, allows for easy on the tool air adjustment. Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep airflow at exact operating...

Compact, lightweight design with gauge, allows for easy on the tool air adjustment. Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep airflow at exact operating pressures. Use where precise airflow is desired.Unit: CD

Converts any standard ball foot tire chucks to a safety blowgun. Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 psi, with up to 150 psi inlet pressure. Conforms...

Converts any standard ball foot tire chucks to a safety blowgun. Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 psi, with up to 150 psi inlet pressure. Conforms to #1001 OSHA regulation. Epoxy finish.Unit: EA

Tru-Flate Air Line Pressure Gauge, Gauge Case Material: Steel, 1/4 in Connection, Threaded Connection, Measuring Range: 0 to 160 psi, Dial Material: Crystal, Socket Material: BrassUnit: CD

Tru-Flate Air Line Pressure Gauge, Gauge Case Material: Steel, 1/4 in Connection, Threaded Connection, Measuring Range: 0 to 160 psi, Dial Material: Crystal, Socket Material: BrassUnit: CD

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the...

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.Unit: EA

Lubricators may be filled while the system is under pressure. Maximum operating pressure is 150 psi at 125 deg F carbonate bowl. Operating temperature range is -10 deg F. For pressures up to 250 psi...

Lubricators may be filled while the system is under pressure. Maximum operating pressure is 150 psi at 125 deg F carbonate bowl. Operating temperature range is -10 deg F. For pressures up to 250 psi at 175 deg F (maximum). 5 oz bowl capacity. Oils with adhesives, compounded oils containing solvents, graphite, detergents or synthetic oils must not be used.Unit: EA

Tru-Flate Air Coupler, Industrial, Specifications: 3/8 in Connection, Inverted Male x MNPT Connection Type, SteelUnit: CD

Tru-Flate Air Coupler, Industrial, Specifications: 3/8 in Connection, Inverted Male x MNPT Connection Type, SteelUnit: CD

Increased performance and yet still meets OSHA regulation 100-1 for 30 psi "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally...

Increased performance and yet still meets OSHA regulation 100-1 for 30 psi "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy-duty die-cast body. Complete with hang-up hook and 1/4 in NPT female inlet. Inlet pressure of 150 psi.Unit: EA

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.Unit: EA

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.Unit: EA

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.Unit: EA

This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.Unit: EA