TPI

TPI ACU Unassembled Pedestal Circulating Fan, 120 VAC, 2.7 A, 60 Hz Frequency, 7200 cfm Air Flow, 2-Speed, 1100 rpm Speed, 12 ft L Cable, Aluminum Blade, Steel Housing Material, Chrome, Gray,...

TPI ACU Unassembled Pedestal Circulating Fan, 120 VAC, 2.7 A, 60 Hz Frequency, 7200 cfm Air Flow, 2-Speed, 1100 rpm Speed, 12 ft L Cable, Aluminum Blade, Steel Housing Material, Chrome, Gray, Includes: Fan Head, MountUnit: EA

Wall mounted and can be used for operation of all 120/240 V electric baseboards, heaters and fans. Double pole, both sides of the line are disconnected in the off position. Recommended for all 240 V...

Wall mounted and can be used for operation of all 120/240 V electric baseboards, heaters and fans. Double pole, both sides of the line are disconnected in the off position. Recommended for all 240 V units and for additional safety with 120 V units. Mount in standard deep receptacle box. UL listed.Unit: EA

Fan forced and features a heavy-duty heating element with large fin area for maximum heat transfer. High-quality nickel chrome wire is sealed in a steel tubular sheath. A simple field conversion to...

Fan forced and features a heavy-duty heating element with large fin area for maximum heat transfer. High-quality nickel chrome wire is sealed in a steel tubular sheath. A simple field conversion to a tamper-resistant feature. Whisper quiet, vane axial fan that has proven to be successful in other products. Rough-in dimensions 19-15/16 in H x 14-3/16 in W x 4 in D. Surface mounting kit is not included. Decorator ivory finish. UL listed. Built-in single pole thermostat. Surface mounting kit can...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.Unit: EA

A double pole thermostat is wired directly to the main circuit breaker but will have four wires instead of two. This allows for the thermostat to operate on two separate circuits. Double pole...

A double pole thermostat is wired directly to the main circuit breaker but will have four wires instead of two. This allows for the thermostat to operate on two separate circuits. Double pole thermostats have an "off" button and can cut off power completely to the heater, even if the temperature drops below the set temperature.Unit: EA

Radiant and fan forced heating, independently or together, at the touch of a control. With lifetime, 2 Neo-Glo heating elements, mounted in front of highly polished aluminum reflectors, delivers...

Radiant and fan forced heating, independently or together, at the touch of a control. With lifetime, 2 Neo-Glo heating elements, mounted in front of highly polished aluminum reflectors, delivers fast, comfortable warmth. Three heat selection hi/medium/low. Controlled by an automatic thermostat. Tip-over switch. Hammertone Beige finish. 120 V. 11 in W x 15 in H x 12 in D.Unit: EA

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.Unit: EA

Wall mounted and can be used for operation of all 120/240 V electric baseboards, heaters and fans. Single Pole: breaks one side of the line. Rated 20 A, 120/240 VAC. Adjustable range 50 to 90 deg F....

Wall mounted and can be used for operation of all 120/240 V electric baseboards, heaters and fans. Single Pole: breaks one side of the line. Rated 20 A, 120/240 VAC. Adjustable range 50 to 90 deg F. Recommended for all 120 V units. Mount in standard deep receptacle box. U.L. Listed.Unit: EA

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.Unit: EA

Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade 2200 rpm/70 CFM. Powder-coated 20 ga steel front. Rough in dimensions 14-1/2 ft W x 7-1/8 ft H, 3-1/2 ft deep....

Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade 2200 rpm/70 CFM. Powder-coated 20 ga steel front. Rough in dimensions 14-1/2 ft W x 7-1/8 ft H, 3-1/2 ft deep. Single pole built-in thermostat. Unit not approved for ceiling mount applications. Unit can be positioned to allow left, right or top discharge. Grill dimensions of 16-3/4 in W x 7-5/8 in H.Unit: EA

Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade, 2200 rpm/70 CFM. Powder-coated 20 ga steel front. Rough in dimensions 14-1/2 ft W x 7-1/8 ft H, 3-1/2 ft deep....

Manual reset thermal limit. Finned tubular steel element. Propeller style fan blade, 2200 rpm/70 CFM. Powder-coated 20 ga steel front. Rough in dimensions 14-1/2 ft W x 7-1/8 ft H, 3-1/2 ft deep. Single pole built-in thermostat. Unit not approved for ceiling mount applications. Unit can be positioned to allow left, right or top discharge. Grill dimensions of 16-3/4 in W x 7-5/8 in H.Unit: EA

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.Unit: EA

Fan forced and features a heavy-duty heating element with large fin area for maximum heat transfer. High-quality nickel chrome wire is sealed in a steel tubular sheath. A simple field conversion to...

Fan forced and features a heavy-duty heating element with large fin area for maximum heat transfer. High-quality nickel chrome wire is sealed in a steel tubular sheath. A simple field conversion to a tamper-resistant feature. Whisper quiet, vane axial fan that has proven to be successful in other products. Rough-in dimensions 19-15/16 in H x 14-3/16 in W x 4 in D. Surface mounting kit is not included. Decorator ivory finish. UL listed. Built-in single pole thermostat. Surface mounting kit can...

The thermostat plate is what gives it the color. A matching plate is sent with each baseboard heater purchased, which is separate from the thermostat. If they order a white heater, then a white...

The thermostat plate is what gives it the color. A matching plate is sent with each baseboard heater purchased, which is separate from the thermostat. If they order a white heater, then a white plate is sent that is made to fit over a TBD Thermostat. If they order an ivory baseboard heater, an ivory plate is sent. A single pole thermostat operates off one circuit, this means the power to the unit can only operate in one direction or electrical current. Because of this the single pole...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.Unit: EA

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.Unit: EA

240 V. Temperature control thermostat. Manual reset limit control. 20 A, 6 ft L, three-conductor cord. NEMA No.6-20P cord and plug. UL listed. 16 in x 16 in x 8-1/2 in.Unit: EA

240 V. Temperature control thermostat. Manual reset limit control. 20 A, 6 ft L, three-conductor cord. NEMA No.6-20P cord and plug. UL listed. 16 in x 16 in x 8-1/2 in.Unit: EA

Adapter plate allows replacement of all CB Series and MW Series heaters. Opening 14-3/4 in x 6-3/4 in. Overall 21-1/2 in x 12-1/4 in.Unit: EA

Adapter plate allows replacement of all CB Series and MW Series heaters. Opening 14-3/4 in x 6-3/4 in. Overall 21-1/2 in x 12-1/4 in.Unit: EA

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in...

Stainless steel heating element and aluminum fins. Painted 22 ga steel front with 20 ga junction boxes located on each end of the heater, junction boxes contain quick connect cable clamps and 6 in ground lead wires. Over-temperature thermal limit extends entire length of heated area. A full length wireway provided along the back of the heater. Safely installs with standard 60 deg C building wire. 240 V. UL listed. Thermostat sold separately.Unit: EA