SIMMONS MFG

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel perforated strainer, spring and locknut. No 404SB enters 2 in pipe. 400 psi working...

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel perforated strainer, spring and locknut. No 404SB enters 2 in pipe. 400 psi working pressure.Unit: EA

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, stainless steel washer and stainless steel locknut. 400 psi working...

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, stainless steel washer and stainless steel locknut. 400 psi working pressure.Unit: EA

The Frostproof yard hydrant provides running water for lawn and garden, livestock and fire protection all year, even in sub-zero temperatures. The shut-off valve operates below the frost line....

The Frostproof yard hydrant provides running water for lawn and garden, livestock and fire protection all year, even in sub-zero temperatures. The shut-off valve operates below the frost line. Hydrant cannot freeze because when it is closed, all water in the standpipe drains out a hole in the valve which is set in the ground below the frost line. Hydrant spout operates at a convenient height (24 in) from the ground level so that it can spill into a stock tank. Adapter (No 8828) is threaded for...

Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-ring. Vertical position indicator. Fits 5 to 12 in well casing with 1 in drop pipe. Factory tested to 250 psi....

Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-ring. Vertical position indicator. Fits 5 to 12 in well casing with 1 in drop pipe. Factory tested to 250 psi. Supports 5000 lb. Certified Water Tight by the Water Systems Council Pitless Adapter Division.Unit: EA

Simmons Yard Hydrant Repair Kit, Brass/Stainless Steel, Suitable for: 900 Series Yard Hydrant, Includes: (2) Brass Lines, (2) O-Rings, Brass Connector, Brass Packing Nut, Plunger, Stainless Steel...

Simmons Yard Hydrant Repair Kit, Brass/Stainless Steel, Suitable for: 900 Series Yard Hydrant, Includes: (2) Brass Lines, (2) O-Rings, Brass Connector, Brass Packing Nut, Plunger, Stainless Steel Lot Nut, Fulcrum Bolt, Square Head Set ScrewUnit: EA

Tank leg length 10 in, female tapping each leg 3/4 in, male tapping each leg 1 in, female tapping top of cross both 1/2 in, two female tappings on side 1/4 in.Unit: EA

Tank leg length 10 in, female tapping each leg 3/4 in, male tapping each leg 1 in, female tapping top of cross both 1/2 in, two female tappings on side 1/4 in.Unit: EA

Reduces OD to allow for greater waterway. Entire coupling galvanized.Unit: EA

Reduces OD to allow for greater waterway. Entire coupling galvanized.Unit: EA

Simmons 900 Yard Hydrant, Inlet Connection Size: 3/4 in, Outlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Type: Male Thread, 70 psi, Head Material: Cast Iron, Cast Iron...

Simmons 900 Yard Hydrant, Inlet Connection Size: 3/4 in, Outlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Type: Male Thread, 70 psi, Head Material: Cast Iron, Cast Iron Handle, Blue, Rod Diameter: 7/16 in, Bury Depth: 6 ft, 8 ft OALUnit: EA

1 in x 10 in long tank cross, silicon bronze fabricated with copper pipe and male fitting, one 1/2 in female tap in top of cross, 3/4 in FIP x 1 in MIP tapping on each leg.Unit: EA

1 in x 10 in long tank cross, silicon bronze fabricated with copper pipe and male fitting, one 1/2 in female tap in top of cross, 3/4 in FIP x 1 in MIP tapping on each leg.Unit: EA

Simmons 900 Frost-Proof Yard Hydrant, Inlet Connection Size: 3/4 in, Outlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Type: Male Hose Threaded, 70 psi, Head Material:...

Simmons 900 Frost-Proof Yard Hydrant, Inlet Connection Size: 3/4 in, Outlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Type: Male Hose Threaded, 70 psi, Head Material: Cast Iron, Cast Iron Handle, Blue, Bury Depth: 3 ftUnit: EA

Simmons PlungerUnit: EA

Simmons PlungerUnit: EA

For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly...

For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high-quality of rubber packet, drawing together the top and bottom castings by tightening of belts. Boxed.Unit: EA

Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4 to 6 in casing. Easy to use, snap-in wire guide. With split circle wire...

Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4 to 6 in casing. Easy to use, snap-in wire guide. With split circle wire hole.Unit: EA

Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.Unit: EA

Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.Unit: EA

Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of...

Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of casting relieves pressure during driving operation.Unit: EA

Shut-off valve operates below the frost line. Hydrant cannot freeze because when it is closed, all water in the stand pipe drains out of a hole in the valve which is set in the ground below the...

Shut-off valve operates below the frost line. Hydrant cannot freeze because when it is closed, all water in the stand pipe drains out of a hole in the valve which is set in the ground below the frost line. Pistol type handle. Hand wheel designed to lock the flow of water at rate desired. Solid brass rod through brass packing nut will not rust and cut into rubber O-ring. Solid brass links and connector. 1 piece molded Buna-N plunger can be easily adjusted or replaced without removing...

Simmons 900 Yard Hydrant, Inlet Connection Size: 3/4 in, Outlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Type: Male Thread, 70 psi, Head Material: Cast Iron, Cast Iron...

Simmons 900 Yard Hydrant, Inlet Connection Size: 3/4 in, Outlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Type: Male Thread, 70 psi, Head Material: Cast Iron, Cast Iron Handle, Blue, Rod Diameter: 7/16 in, Bury Depth: 4 ft, 6 ft OALUnit: EA

Fits 1 in or 1-1/4 in drop pipe, 4 in to 8 in well casing. Supplied with two stainless steel clamps.Unit: EA

Fits 1 in or 1-1/4 in drop pipe, 4 in to 8 in well casing. Supplied with two stainless steel clamps.Unit: EA

Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.Unit: EA

Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.Unit: EA

Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-ring. Vertical position indicator. Fits 5 to 12 in well casing with 1 in drop pipe. Factory tested to 250 psi....

Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-ring. Vertical position indicator. Fits 5 to 12 in well casing with 1 in drop pipe. Factory tested to 250 psi. Supports 5000 lb. Certified Water Tight by the Water Systems Council Pitless Adapter Division.Unit: EA

Compression sleeve for 3 wire. Wire sizes for 3 wire 10-12-14 submersible cable.Unit: PK

Compression sleeve for 3 wire. Wire sizes for 3 wire 10-12-14 submersible cable.Unit: PK

For all charging applications. For use with conventional tanks.Unit: EA

For all charging applications. For use with conventional tanks.Unit: EA

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure...

Silicon bronze cast body and poppet contain less than 0.05% lead. Furnished with Buna-N O-ring, stainless steel spring, washer and locknut. All valves 1/2 in through 1-1/2 in have a working pressure of 400 psi. All valves 2 in and larger have a working pressure of 600 psi.Unit: EA

Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No AV-45 80 Maximum Tank Gallons, 1/4 in FIP. No AV-100 100...

Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No AV-45 80 Maximum Tank Gallons, 1/4 in FIP. No AV-100 100 Maximum Tank Gallons, 3/8 in FIP. 42 Maximum Tank Gallons, 1/4 in FIP.Unit: EA