PRO-FLEX

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Includes attached fitting complete with all components (Retainer ring, slide ring, O-ring and high temperature gasket) required to assemble to Pro-Flex tubing.Unit: EA

Includes attached fitting complete with all components (Retainer ring, slide ring, O-ring and high temperature gasket) required to assemble to Pro-Flex tubing.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.Unit: EA

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.Unit: EA

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas...

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.Unit: FT

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas...

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas piping system using corrugated stainless steel tubing (CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.Unit: FT

Includes attached fitting complete with all components (Retainer ring, slide ring, O-ring and high temperature gasket) required to assemble to Pro-Flex tubing.Unit: EA

Includes attached fitting complete with all components (Retainer ring, slide ring, O-ring and high temperature gasket) required to assemble to Pro-Flex tubing.Unit: EA

The Pro-Flex Single Appliance Kit is provides everything needed for hooking up gas to one appliance such as a traditional water heater, gas fireplace, gas logs, gas dryer or many other...

The Pro-Flex Single Appliance Kit is provides everything needed for hooking up gas to one appliance such as a traditional water heater, gas fireplace, gas logs, gas dryer or many other appliances.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Pro-Flex Manifold, Number of Outlets: 4, Inlet Connection Size: 1/2 in, Inlet Connection Type: 1/2 in, Outlet Connection Type: FNPTUnit: EA

Pro-Flex Manifold, Number of Outlets: 4, Inlet Connection Size: 1/2 in, Inlet Connection Type: 1/2 in, Outlet Connection Type: FNPTUnit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing.Unit: EA

Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing.Unit: EA

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas...

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas piping system using corrugated stainless steel tubing (CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.Unit: FT

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas...

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.Unit: FT

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas...

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas piping system using corrugated stainless steel tubing (CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.Unit: COIL

Pro-Flex CSST Adapter, Nominal Size: 3/4 in, Operating Temperature: -20 to 200 deg F, BrassUnit: EA

Pro-Flex CSST Adapter, Nominal Size: 3/4 in, Operating Temperature: -20 to 200 deg F, BrassUnit: EA

UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.Unit: EA

UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.Unit: EA

Pro-Flex Floppy-Flex Protective Conduit, Trade Size: 1-1/4 in, Aluminum, Galvanized, 12 in L, Operating Temperature: 32 to 200 deg F, Suitable for: 3/4 in CCST TubingUnit: EA

Pro-Flex Floppy-Flex Protective Conduit, Trade Size: 1-1/4 in, Aluminum, Galvanized, 12 in L, Operating Temperature: 32 to 200 deg F, Suitable for: 3/4 in CCST TubingUnit: EA

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.Unit: EA

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Pro-Flex Manifold, Number of Outlets: 4, Inlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Size: 1/2 in, Outlet Connection Type: FNPT, MetalUnit: EA

Pro-Flex Manifold, Number of Outlets: 4, Inlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Size: 1/2 in, Outlet Connection Type: FNPT, MetalUnit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA

Yellow handle. 1/2 psi maximum working pressure.Unit: EA