PRIME LINE PRODUCTS

Die-cast painted housing with case-hardened steel bolt. Securely locks door in closed or ventilating position. 2-1/4 in L x 1-1/16 in W. Prevents sliding or lifting of door. Bolt 5/8 in. Includes 1...

Die-cast painted housing with case-hardened steel bolt. Securely locks door in closed or ventilating position. 2-1/4 in L x 1-1/16 in W. Prevents sliding or lifting of door. Bolt 5/8 in. Includes 1 lock and 2 installation screws. Prefix U on factory number denotes new Prime-Line packaging.Unit: CD

N 7316 is a 3-Piece adjustable floor guide. Made of tan nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door...

N 7316 is a 3-Piece adjustable floor guide. Made of tan nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers.Unit: EA

These outside miter screen frame corners are used to repair Pella aluminum screen frames. Measuring 3/4 in x 7/16 in.Unit: PK 20

These outside miter screen frame corners are used to repair Pella aluminum screen frames. Measuring 3/4 in x 7/16 in.Unit: PK 20

N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.Unit: CD 2

N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.Unit: CD 2

Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2 to 1 in thick. Keyed locking for maximum security. Includes 1 each, lock, trim collar, spur washer and...

Plated die-cast housing and steel cams can be mounted to metal or wood door/drawer from 1/2 to 1 in thick. Keyed locking for maximum security. Includes 1 each, lock, trim collar, spur washer and lock nut, 3 each, cams, rotation washers and keys. Prefix U on factory number denotes new Defender Security packaging.Unit: CD

All steel construction, coil spring retraction, aircraft cable lifters. Fits Duplex, Excellent, Preset and Fabco. Contains 1 sash balance with attaching hardware. Length of 6-3/8 in.Unit: BX

All steel construction, coil spring retraction, aircraft cable lifters. Fits Duplex, Excellent, Preset and Fabco. Contains 1 sash balance with attaching hardware. Length of 6-3/8 in.Unit: BX

The H 3968 is a stone die-cast tee handle that fits older Andersen casement operators. The 3/8 in bore fits Andersen 3/8 in spindles and is held firmly in place with the supplied set screw. This tee...

The H 3968 is a stone die-cast tee handle that fits older Andersen casement operators. The 3/8 in bore fits Andersen 3/8 in spindles and is held firmly in place with the supplied set screw. This tee handle is stone in color. The tee design is often used to replace the normal crank handle when it interferes with window blinds.Unit: CD

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.Unit: PK 2

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.Unit: PK 2

Heavy-duty extruded aluminum with double thumbscrew adds additional gripping power to securely lock windows in closed or ventilating position, easy to install.Unit: EA

Heavy-duty extruded aluminum with double thumbscrew adds additional gripping power to securely lock windows in closed or ventilating position, easy to install.Unit: EA

K 5003 is an aluminum finished spring-loaded style strike used on screen or storm doors that have a rigid interior latch. The two 1/16 in shim plates and slotted screw holes allow it to be...

K 5003 is an aluminum finished spring-loaded style strike used on screen or storm doors that have a rigid interior latch. The two 1/16 in shim plates and slotted screw holes allow it to be adjustable to fit most installations.Unit: CD

The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.Unit: CD 8

The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.Unit: CD 8

This screen door keeper or strike was often used by Columbia and trim view screen doors as well as many other screen door manufacturers. It is 1/2 in wide with a 9/16 in hook projection. It has an...

This screen door keeper or strike was often used by Columbia and trim view screen doors as well as many other screen door manufacturers. It is 1/2 in wide with a 9/16 in hook projection. It has an upward hook and adjustment slot that allows it to be adjusted up or down to the correct position to engage the latch.Unit: CD

Hinged assembly with spring-loaded plunger Lock, clear adhesive handing securely blocks door in closed or ventilating position. No tools needed to install. Inconspicuous when installed. Mounts to...

Hinged assembly with spring-loaded plunger Lock, clear adhesive handing securely blocks door in closed or ventilating position. No tools needed to install. Inconspicuous when installed. Mounts to glass surface of stationary glass panel.Unit: PK 2

Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4 in - 20 x 1-7/8 in pancake head carriage bolts with nuts.Unit: CD

Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4 in - 20 x 1-7/8 in pancake head carriage bolts with nuts.Unit: CD

This sliding screen door handle fits a Columbia 1/2 in thick door as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The...

This sliding screen door handle fits a Columbia 1/2 in thick door as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, A 163 or A 166. The inside latch lever has a nite lock feature.Unit: CD

This high density polyethylene roller assembly was used on HiLite doors. It is a high density polyethylene bracket with a spring loaded 9/16 in Dia flat edged high density polyethylene roller...

This high density polyethylene roller assembly was used on HiLite doors. It is a high density polyethylene bracket with a spring loaded 9/16 in Dia flat edged high density polyethylene roller inside. It fits into a rectangle slot in the bottom of the door and is held in by the included screw.Unit: CD

Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes one piece with an adhesive back. 0.045 in wall thickness.Unit: EA ...

Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes one piece with an adhesive back. 0.045 in wall thickness.Unit: EA

Prime-Line Mirror Holder Clip, Acrylic, Clear, Dimensions: 5/8 in W x 1/8 in Thick, Suitable for: 1/8 or 1/4 in Thick Mirror, Includes: Anchor, ScrewUnit: EA

Prime-Line Mirror Holder Clip, Acrylic, Clear, Dimensions: 5/8 in W x 1/8 in Thick, Suitable for: 1/8 or 1/4 in Thick Mirror, Includes: Anchor, ScrewUnit: EA

The TH 23098 is a left handed casement window sash lock. It is white painted die-cast zinc construction. Mounting holes are 2-3/8 in apart. When the lever is turned, the locking cam engages the...

The TH 23098 is a left handed casement window sash lock. It is white painted die-cast zinc construction. Mounting holes are 2-3/8 in apart. When the lever is turned, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping.Unit: EA

N 6625 is a bottom mount roller assembly for mirrored wardrobe doors. Used on Crest Door and other mirror doors, the roller assembly installs up into the bottom of the metal framed mirror door. The...

N 6625 is a bottom mount roller assembly for mirrored wardrobe doors. Used on Crest Door and other mirror doors, the roller assembly installs up into the bottom of the metal framed mirror door. The tab on the back end of the housing allows a screw to hold it in place while the adjusting screw can be accessed through a hole below the installation screw. The 1-1/4 in concave nylon ball bearing roller allows the metal framed mirrored door to roll smoothly and effortlessly.Unit: CD

Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.Unit: CD 2

Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains 2 roller assemblies, 2 sets of installation screws.Unit: CD 2

This item is a screen retainer spline designed to be use for securing various types of screen fabric-into a window screen or screen door frame. 0.185 in Dia. It is a top quality round, serrated...

This item is a screen retainer spline designed to be use for securing various types of screen fabric-into a window screen or screen door frame. 0.185 in Dia. It is a top quality round, serrated vinyl with a hollow core. Color is gray.Unit: BAG

Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.Unit: CD 2

Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.Unit: CD 2

Standard latch strike with 1-5/8 in hole centers. Adjustable tab. Replaces most residential interior and exterior strikes. 1-7/16 in x 2-1/4 in.Unit: CD

Standard latch strike with 1-5/8 in hole centers. Adjustable tab. Replaces most residential interior and exterior strikes. 1-7/16 in x 2-1/4 in.Unit: CD