Products 1-24 of 36
Show
Availability: Home Delivery Only
Item #: VORG7706237 -

Malco Redline Series SL8R Snap Lock Punch, 8-1/2 in L, Alloy Steel

Retail: $64.69
Price: $56.23

    The snap lock punch for vinyl siding produces wider, more prominent rectangular tab projections for securing vinyl skirting or siding to finishing trim. The raised tabs grip a greater surface area...

    The snap lock punch for vinyl siding produces wider, more prominent rectangular tab projections for securing vinyl skirting or siding to finishing trim. The raised tabs grip a greater surface area and guard against dislodging due to relaxation of vinyl from heat or blowout during times of high pressure and wind. Constructed of hardened steel stampings and rugged investment cast alloy steel jaws with rust-resistant nickel plate and black oxide finishes to ensure long service life."REDLINE"FOR...

    Availability: Home Delivery or Ship to Store For Pick Up
    Item #: VORG1478106 -

    Malco TSMD Drill Attachment, Double

    Retail: $165.45
    Price: $143.81

      Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD TurboShear drill attachment fits a corded or cordless drill...

      Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD TurboShear drill attachment fits a corded or cordless drill you already own. The blades of the Malco Double-Cut TurboShears remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut. These blades can approach a cut from either end to produce a quality work-piece edge. They can also navigate up to 90 deg...

      Availability: Home Delivery or Ship to Store For Pick Up
      Item #: VORG0795286 -

      Malco FCFG Fiber Cement Siding Gauge, 10-7/8 in L, Nylon, Red

      Retail: $21.65
      Was: $18.78
      Sale: $15.43

        Using the facing gauge while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging. The FCFG facing gauge may also be used in combination...

        Using the facing gauge while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging. The FCFG facing gauge may also be used in combination with the Malco FCG2 overlap gauge to prop up one end of the plank for one-person application.Lgth In=10-7/8FOR FIBER CEMENT SIDINGNYLONUnit: EA

        Availability: Home Delivery or Ship to Store For Pick Up
        Item #: VORG6743504 -

        Malco Andy Snip MC12N Combination Snip, 12 in OAL, 3 in L Cut, J-Channel Cut, Steel Blade, Loop Handle, Charcoal Handle

        Retail: $45.05
        Price: $39.13

          Sleek styling, easy blade replacement and larger handles make the AndyΓäó Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in vinyl siding, aluminum, copper...

          Sleek styling, easy blade replacement and larger handles make the AndyΓäó Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in vinyl siding, aluminum, copper or sheet metal. Snips are capable of cutting tight material shapes such as a J-Channel. A full 3 in cutting length makes straight shearing with the Malco AndyΓäó Snip fast and easy. Blade replacement is easily accomplished in the field."ANDY SNIP"ComboLgth In=12Lgth Of Cut In=3ALUMINUM HANDLEUnit: EA ...

          Availability: Home Delivery or Ship to Store For Pick Up
          Item #: VORG1979087 -

          Malco TSCM Turbo Shear, Tool Only, 0.012 to 0.024 in Cutting Capacity

          Retail: $150.59
          Price: $130.92

            Malco's TSCM TurboShears work better and faster than manual metal roofing shears. This versatile and portable TurboShear fits a drill you already own to make easy cross cuts, fast lengthwise cuts...

            Malco's TSCM TurboShears work better and faster than manual metal roofing shears. This versatile and portable TurboShear fits a drill you already own to make easy cross cuts, fast lengthwise cuts and precise circular and square outlet cuts in large or small pattern corrugated metal roofing and common trapezoidal (box) pattern metal roofing panels. Elongated blades with compact jaws create a steep 75 deg offset so that the drill is held at a nearly vertical approach when starting a cut. As...

            Availability: Home Delivery or Ship to Store For Pick Up
            Item #: VORG6056196 -

            Malco MC12NRB Replacement Snip Blade, 3 in OAL, Steel Blade

            Retail: $31.29
            Was: $27.18
            Sale: $22.36

              Replacement blades and rivets; pressure fit inset blades make field replacement easy.FOR ANDY SNIPSUnit: PR

              Replacement blades and rivets; pressure fit inset blades make field replacement easy.FOR ANDY SNIPSUnit: PR

              Availability: Home Delivery or Ship to Store For Pick Up
              Item #: VORG1979095 -

              Malco TNP3S Trim Nail Punch, 5 in L, Steel

              Retail: $20.35
              Was: $17.64
              Sale: $14.79

                Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when...

                Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4 in (31.2 mm) standard trim nails.MINIColor=BlackHEAVY-DUTYUnit: CD

                Availability: Home Delivery or Ship to Store For Pick Up
                Item #: VORG6002000 -

                Malco 18F Folding Tool, 24 ga Sheet, Steel

                Retail: $33.39
                Was: $28.99
                Sale: $26.51

                  18F folding tools offer a sturdy solution for folding sheet metal. Each model is made with excellent design and include handy sight holes to assure proper depth alignment.FIXED DEPTH & LENGTHUnit:...

                  18F folding tools offer a sturdy solution for folding sheet metal. Each model is made with excellent design and include handy sight holes to assure proper depth alignment.FIXED DEPTH & LENGTHUnit: EA

                  Availability: Home Delivery or Ship to Store For Pick Up
                  Item #: VORG5674106 -

                  Malco Andy Snip MV12 Combination Snip, 12 in OAL, 3 in L Cut, Left, Right Cut, Steel Blade, Vinyl Grip Handle

                  Retail: $51.45
                  Price: $44.67

                    Cut through heavy vinyl siding lock seams and more with ease. The MV12 aluminum handled snip is part of the legendary Andy Snip line of "lightweight snips with the strength of steel". This unique...

                    Cut through heavy vinyl siding lock seams and more with ease. The MV12 aluminum handled snip is part of the legendary Andy Snip line of "lightweight snips with the strength of steel". This unique AndyΓäó combination snip design features a knife-like cutting edge to produce a smooth slicing action for easy one-hand operation. The user simply grasps the snip with the red grip up for optimal blade alignment when making straight cuts or left or right circular cuts in a variety of non-ferrous...

                    Availability: Home Delivery or Ship to Store For Pick Up
                    Item #: VORG1684455 -

                    Malco M12NRB Replacement Snip Blade, 3 in OAL

                    Retail: $30.35
                    Was: $26.36
                    Sale: $21.68

                      Replacement blades and rivets; pressure fit inset blades make field replacement easy.FOR ANDY SNIPSUnit: PR

                      Replacement blades and rivets; pressure fit inset blades make field replacement easy.FOR ANDY SNIPSUnit: PR

                      Availability: Home Delivery or Ship to Store For Pick Up
                      Item #: VORG6496566 -

                      Malco Andy Snip M12N/M12 Pattern Snip, 12 in OAL, 3 in L Cut, Straight Cut, Steel Blade, Loop Handle, Gray Handle

                      Retail: $47.05
                      Was: $40.85
                      Sale: $37.35

                        Sleek styling, easy blade replacement and larger handles make the AndyΓäó Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in vinyl siding, aluminum, copper...

                        Sleek styling, easy blade replacement and larger handles make the AndyΓäó Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in vinyl siding, aluminum, copper or sheet metal. Snips are capable of cutting tight material shapes such as a J-Channel. A full 3 in cutting length makes straight shearing with the Malco AndyΓäó snip fast and easy. Blade replacement is easily accomplished in the field."ANDY SNIP"StraightLgth In=12Lgth Of Cut In=3ALUMINUM HANDLEUnit:...

                        Availability: Home Delivery or Ship to Store For Pick Up
                        Item #: VORG5002373 -

                        Malco AVsMini Series AVM6 EV Aviation Snip, Left Cut, Spring-Loaded Handle, Red Handle

                        Retail: $22.69
                        Was: $19.67
                        Sale: $18.01

                          With an overall length of only 7-1/8 in, the AVS Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 in length of cut provides the optimum speed...

                          With an overall length of only 7-1/8 in, the AVS Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4 in length of cut provides the optimum speed for confined cutting applications where this small, maneuverable snip excels. Each snip is made with forged steel jaws that contain precision-ground serrations on the lower blade, which produces a sharply defined edge for cutting accuracy and control. The AVS Mini left cutting offset design provides...

                          Availability: Home Delivery Only
                          Item #: VORG6847248 -

                          Malco Redline Series NHP1R Nail Hole Punch, 8-1/2 in L, Alloy Steel

                          Retail: $57.05
                          Price: $49.59

                            For punching holes in vinyl and aluminum siding. Punches horizontal slot for adding or elongating nail holes in siding to accommodate irregular stud spacing. Slot measures 5/32 in x 3/4 in. Throat...

                            For punching holes in vinyl and aluminum siding. Punches horizontal slot for adding or elongating nail holes in siding to accommodate irregular stud spacing. Slot measures 5/32 in x 3/4 in. Throat depth of 5/8 in with 8-1/2in L. Ergonomic Redline handles with unique one-hand operation latch."REDLINE"Color=RedVINYL & ALUMINUM SIDINGUnit: EA

                            Availability: Home Delivery or Ship to Store For Pick Up
                            Item #: VORG2874246 -

                            Malco TSHD Metal Cutting Attachment Shear, Heavy-Duty, Steel, Galvanized

                            Retail: $128.25
                            Price: $111.46

                              The Malco TurboShear Heavy Duty (TSHD) is a powerful drill attachment for cutting sheet metal that quickly inserts into the chuck of a corded or cordless drill. This electric shear attachment has...

                              The Malco TurboShear Heavy Duty (TSHD) is a powerful drill attachment for cutting sheet metal that quickly inserts into the chuck of a corded or cordless drill. This electric shear attachment has the capability to make fast straight, curved or square cuts in most common sheet metals. The shear's wide-opening jaws can operate at high or low speeds for the control you need. The heavy-duty gearing and beefy, hardened carbon steel blades of the tool combine to offer up to 18 ga (1.22 mm) cutting...

                              Availability: Home Delivery or Ship to Store For Pick Up
                              Item #: VORG6496632 -

                              Malco TNP2S Trim Nail Punch, 6-3/4 in L, Aluminum/Steel

                              Retail: $23.09
                              Price: $20.04

                                Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when...

                                Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Accommodates up to 1-1/4 in (31.2 mm) standard trim nails.Color=BlueHEAVY-DUTYUnit: EA

                                Availability: Out of Stock
                                Item #: VORG6847420 -

                                Malco Products S2r Hand Seamer 3in

                                Retail: $65.95
                                Price: $57.33

                                  Precise vee-notched depth graduations on jaws are in 1/4"(6.4 mm) increments. Jaws are drop forged, high impact steel. Hardened steel handles resist abuse. Powerful compound leverage design. Tool...

                                  Precise vee-notched depth graduations on jaws are in 1/4"(6.4 mm) increments. Jaws are drop forged, high impact steel. Hardened steel handles resist abuse. Powerful compound leverage design. Tool also features rust resistant nickel plating. Ergonomic REDLINE handles with unique one hand operation latch. Jaw width is 3-1/4"; Jaw depth is 1-1/4"."REDLINE"Color=RedJaw Lgth In=3-1/4FORGED STEEL JAWUnit: EA

                                  Availability: Home Delivery or Ship to Store For Pick Up
                                  Item #: VORG1478098 -

                                  Malco TS1 Metal Cutting Attachment Shear, Steel, Galvanized, For: 1200 rpm 3/8 in Cordless or Corded Drill

                                  Retail: $71.55
                                  Price: $62.15

                                    The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It's that easy to convert your power drill to a power shear. This rugged but...

                                    The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill. It's that easy to convert your power drill to a power shear. This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20 ga (1.02 mm) galvanized steel. Blind cuts require only a 1/2 in (12.7 mm) starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal...

                                    Availability: Home Delivery or Ship to Store For Pick Up
                                    Item #: VORG1979079 -

                                    Malco TSF1 Siding Shear Attachment, Steel, For: 14.4 V or Larger Cordless or Standard A/C Power Drills

                                    Retail: $222.99
                                    Price: $193.86

                                      Make fast, accurate cuts in fiber cement siding anywhere on the job with a versatile and powerful TurboShear Drill Attachment. Malco's one-hand operation fiber cement shears quickly insert into the...

                                      Make fast, accurate cuts in fiber cement siding anywhere on the job with a versatile and powerful TurboShear Drill Attachment. Malco's one-hand operation fiber cement shears quickly insert into the chuck of a corded or cordless electric drill or impact driver. Smooth, easy one-hand operation always leaves a free hand to steady the work when making cuts on a bench or scaffolding. A wide skid-plate on the head design stabilizes cutting action for extra-smooth results in 5/16 in (7.9 mm) fiber...

                                      Availability: Home Delivery or Ship to Store For Pick Up
                                      Item #: VORG5381280 -

                                      CRIMPER SHEET METAL 5-BLADE

                                      Retail: $49.15
                                      Was: $42.70
                                      Sale: $39.04

                                        A superior compound leverage mechanism offers maximum ease of operation. Comfortable opening, spring-actuated handles, give additional comfort and control. Ergonomic REDLINE Handles with unique...

                                        A superior compound leverage mechanism offers maximum ease of operation. Comfortable opening, spring-actuated handles, give additional comfort and control. Ergonomic REDLINE Handles with unique one-hand operation latch offer maximum compound leverage performance and natural fit and feel.Throat Depth In=1-5/85-BLADESUnit: EA

                                        Availability: Home Delivery Only
                                        Item #: VORG7230642 -

                                        Malco HW7X1/2ZWG Screw, 1/2-7 Thread, Single Thread, Hex, Slotted Drive, Sheet Metal

                                        Retail: $6.49
                                        Was: $6.45
                                        Sale: $4.19

                                          Malco Screw, Thread Size: 1/2-7, Thread Type: Single, Drive Type: Hex, Slotted, Sheet Metal, Drive Size: 1/4 in, WhiteSize=#7 x 1/2Finish=WhiteHEX HEADZINC-PLATED METALUnit: PK100 ...

                                          Malco Screw, Thread Size: 1/2-7, Thread Type: Single, Drive Type: Hex, Slotted, Sheet Metal, Drive Size: 1/4 in, WhiteSize=#7 x 1/2Finish=WhiteHEX HEADZINC-PLATED METALUnit: PK100

                                          Availability: Home Delivery or Ship to Store For Pick Up
                                          Item #: VORG6199251 -

                                          Malco C4R Downspout Crimper, Ergonomic Handle

                                          Retail: $50.39
                                          Was: $43.77
                                          Sale: $40.01

                                            If you are looking for a tool that efficiently downsizes the corners of aluminum or steel downspout, then the Malco 5 blade gutter crimper is the tool you are looking for. The blades produce 1-1/4...

                                            If you are looking for a tool that efficiently downsizes the corners of aluminum or steel downspout, then the Malco 5 blade gutter crimper is the tool you are looking for. The blades produce 1-1/4 in long double crimps without causing deformation of downspout walls. A factory-like crimp ensures that the downspout walls stay square for a tight fitting, leak-proof connection. A handle closing stop helps to maintain a consistent crimp profile. Made with hardened all-steel construction and a...

                                            Availability: Home Delivery or Ship to Store For Pick Up
                                            Item #: VORG6496608 -

                                            Malco SRT2 Siding Removal Tool, Angled Blade, Vinyl Handle, 6-1/4 in OAL

                                            Retail: $7.45
                                            Price: $6.42

                                              The Malco SideSwiper model SRT2, is a vinyl siding removal tool that combines the comfort and added leverage of an easy-to-grasp straight handle, with the smooth unlocking motion of a burr-free...

                                              The Malco SideSwiper model SRT2, is a vinyl siding removal tool that combines the comfort and added leverage of an easy-to-grasp straight handle, with the smooth unlocking motion of a burr-free hook. The blade of the removal tool is angled from the bottom plane of the handle and allows the user to keep their wrist straight while keeping knuckles well above the work. The surface finishing and plating of the blade assures that the sharply angled hook will not cut into the vinyl material or...

                                              Availability: Home Delivery or Ship to Store For Pick Up
                                              Item #: VORG1199975 -

                                              Malco FCG2 Siding Gauge, 6 in L, Steel, Silver

                                              Retail: $45.49
                                              Was: $39.52
                                              Sale: $36.12

                                                Strong, one-piece tempered spring steel construction with precision-ground tip assures gauge will grip behind siding plank. No adjustments to vary and nothing to mark. Will not mar finish of...

                                                Strong, one-piece tempered spring steel construction with precision-ground tip assures gauge will grip behind siding plank. No adjustments to vary and nothing to mark. Will not mar finish of pre-painted siding. Works with 5/16 in (7.9 mm) fiber cement siding. Permits one person application of panels. Two gauges support entire length of panel and precisely gauge a standard 1-1/4 in (31.2 mm) overlap.Lgth In=6FOR FIBER CEMENT SIDINGSTEELUnit: EA ...

                                                Availability: Home Delivery or Ship to Store For Pick Up
                                                Item #: VORG5002357 -

                                                Malco CB Replacement Cutter Bit, 6-1/2 in L, Steel

                                                Retail: $20.55
                                                Was: $17.81
                                                Sale: $14.65

                                                  Mill type cutter bit for HC1 (373.8515) and HC2.REPLACEMENTGOLD STANDARD SERIESUnit: EA

                                                  Mill type cutter bit for HC1 (373.8515) and HC2.REPLACEMENTGOLD STANDARD SERIESUnit: EA