KOCH INDUSTRIES

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design...

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.Unit: EA

Koch Wire Hair Pin Clip, 2-15/16 in L, Yellow ZincUnit: PK 7

Koch Wire Hair Pin Clip, 2-15/16 in L, Yellow ZincUnit: PK 7

Assorted diameter and rope lengths in multi color twisted poly rope.Unit: EA

Assorted diameter and rope lengths in multi color twisted poly rope.Unit: EA

Koch Jack Chain, Working Load Limit: 10 lb, Trade Size: #16, Steel, Electro Galvanized, 20 ft LUnit: EA

Koch Jack Chain, Working Load Limit: 10 lb, Trade Size: #16, Steel, Electro Galvanized, 20 ft LUnit: EA

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design...

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.Unit: EA

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design...

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.Unit: EA

Koch Wire Hair Pin Clip, 4 in L, Yellow ZincUnit: EA

Koch Wire Hair Pin Clip, 4 in L, Yellow ZincUnit: EA

Weldless, low carbon steel.Unit: EA

Weldless, low carbon steel.Unit: EA

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design...

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.Unit: EA

Koch Aircraft Cable, Working Load Limit: 2880 lb, Strands: 7 x 19, Galvanized, 3/8 in Dia, 250 ft LUnit: L FT

Koch Aircraft Cable, Working Load Limit: 2880 lb, Strands: 7 x 19, Galvanized, 3/8 in Dia, 250 ft LUnit: L FT

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design...

Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1.Unit: EA

For large dogs up to 85 lb. Prepackaged dog tie-out with swivel snaps at each end. 15 FT of 2/0 coil straight chain.Unit: EA

For large dogs up to 85 lb. Prepackaged dog tie-out with swivel snaps at each end. 15 FT of 2/0 coil straight chain.Unit: EA

Useable length 4004503 3-1/2 in, 4004543 3 in, 4004553 3-7/8 in, 4004563 4-1/4 in, 4004593 5 in.Unit: EA

Useable length 4004503 3-1/2 in, 4004543 3 in, 4004553 3-7/8 in, 4004563 4-1/4 in, 4004593 5 in.Unit: EA

Useable length 4004503 3-1/2 in, 4004543 3 in, 4004553 3-7/8 in, 4004563 4-1/4 in, 4004593 5 in.Unit: EA

Useable length 4004503 3-1/2 in, 4004543 3 in, 4004553 3-7/8 in, 4004563 4-1/4 in, 4004593 5 in.Unit: EA

Koch Aircraft Cable, Working Load Limit: 840 lb, Strands: 7 x 19, Stainless Steel, 3/16 in Dia, 250 ft LUnit: ROLL

Koch Aircraft Cable, Working Load Limit: 840 lb, Strands: 7 x 19, Stainless Steel, 3/16 in Dia, 250 ft LUnit: ROLL

Contractor premium-grade nylon masonry twine. Easily hand-held. Holds contractor preferred 6 in tubes, with dispenser and exclusive twine lock. Can be driven to ground. Size #18 twine. Load limit is...

Contractor premium-grade nylon masonry twine. Easily hand-held. Holds contractor preferred 6 in tubes, with dispenser and exclusive twine lock. Can be driven to ground. Size #18 twine. Load limit is 10 lb.Unit: EA

Useable length 4004503 3-1/2 in, 4004543 3 in, 4004553 3-7/8 in, 4004563 4-1/4 in, 4004593 5 in.Unit: EA

Useable length 4004503 3-1/2 in, 4004543 3 in, 4004553 3-7/8 in, 4004563 4-1/4 in, 4004593 5 in.Unit: EA

Useable length 4004503 3-1/2 in, 4004543 3 in, 4004553 3-7/8 in, 4004563 4-1/4 in, 4004593 5 in.Unit: EA

Useable length 4004503 3-1/2 in, 4004543 3 in, 4004553 3-7/8 in, 4004563 4-1/4 in, 4004593 5 in.Unit: EA

Useable length 4002503 3-3/4 in, 4002543 3-1/4 in, 4002553 4-1/4 in, 4002563 4-5/8 in, 4002593 5-5/16.Unit: EA

Useable length 4002503 3-3/4 in, 4002543 3-1/4 in, 4002553 4-1/4 in, 4002563 4-5/8 in, 4002593 5-5/16.Unit: EA

Koch Extruded Cable Ferrule, Cable Diameter: 1/4 in, Aluminum, 1-1/8 in L, Suitable for: 1/4 in RopeUnit: EA

Koch Extruded Cable Ferrule, Cable Diameter: 1/4 in, Aluminum, 1-1/8 in L, Suitable for: 1/4 in RopeUnit: EA

Fits all tractor drawbars, old or new, front or back, to and including 1-5/8 in thick. Use with chain sizes 5/16 to 1/2 in including Grade 43 high test chain.Unit: EA

Fits all tractor drawbars, old or new, front or back, to and including 1-5/8 in thick. Use with chain sizes 5/16 to 1/2 in including Grade 43 high test chain.Unit: EA

Koch Aircraft Cable, Working Load Limit: 350 lb, Strands: 7 x 19, Stainless Steel, 1/8 in Dia, 250 ft LUnit: ROLL

Koch Aircraft Cable, Working Load Limit: 350 lb, Strands: 7 x 19, Stainless Steel, 1/8 in Dia, 250 ft LUnit: ROLL

Koch Aircraft Cable, Working Load Limit: 340 lb, Strands: 7 x 7, Galvanized, 1/8 in Dia, 50 ft LUnit: EA

Koch Aircraft Cable, Working Load Limit: 340 lb, Strands: 7 x 7, Galvanized, 1/8 in Dia, 50 ft LUnit: EA

Low carbon steel welded chain with longer links than machine chain.Unit: EA

Low carbon steel welded chain with longer links than machine chain.Unit: EA