HALEX COMPANY

Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.Unit: BAG 2

Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.Unit: BAG 2

Concretetight and raintight. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure in a wet location.Unit: PK 5

Concretetight and raintight. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure in a wet location.Unit: PK 5

Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.Unit: EA

Die-cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.Unit: EA

Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk pack, Box of 100.Unit: EA

Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk pack, Box of 100.Unit: EA

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.Unit: BX 25

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.Unit: BX 25

Zinc die-cast. Use to join two lengths of EMT conduit together. UL approved.Unit: BAG 1

Zinc die-cast. Use to join two lengths of EMT conduit together. UL approved.Unit: BAG 1

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.Unit: BX100

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.Unit: BX100

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.Unit: BAG 4

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.Unit: BAG 4

Halex Quick-Set Connector, Trade Size: 1/2 in, Compression Connection, PVC, Gray, 2.37 in L, Suitable for: Type B Non-Metallic Liquidtight ConduitUnit: BAG 1

Halex Quick-Set Connector, Trade Size: 1/2 in, Compression Connection, PVC, Gray, 2.37 in L, Suitable for: Type B Non-Metallic Liquidtight ConduitUnit: BAG 1

Halex Liquidtight Connector, 1 in Trade, PVC/Zinc, Suitable for: 1/2 in KnockoutUnit: EA

Halex Liquidtight Connector, 1 in Trade, PVC/Zinc, Suitable for: 1/2 in KnockoutUnit: EA

Use to join two lengths of EMT conduit together. Zinc. UL, CSA approved.Unit: PK 45

Use to join two lengths of EMT conduit together. Zinc. UL, CSA approved.Unit: PK 45

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL...

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.Unit: EA

Halex Conduit Nipple, 3/4 x 6 in Trade, Threaded Connection, SteelUnit: EA

Halex Conduit Nipple, 3/4 x 6 in Trade, Threaded Connection, SteelUnit: EA

In a dry location, use to connect aluminum or steel AC, aluminum MC and steel flexible metal conduit. Suitable for aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal...

In a dry location, use to connect aluminum or steel AC, aluminum MC and steel flexible metal conduit. Suitable for aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, 0.45 in Dia aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included.Unit: EA

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL...

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.Unit: EA

Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.Unit: BAG 1

Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.Unit: BAG 1

Use to connect S, SO, ST, SJ, SJO and SJT cord to a steel outlet box or other metal enclosure. UL approved and CSA certified.Unit: BAG 2

Use to connect S, SO, ST, SJ, SJO and SJT cord to a steel outlet box or other metal enclosure. UL approved and CSA certified.Unit: BAG 2

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA...

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.Unit: BAG 2

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.Unit: BAG10

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.Unit: BAG10

Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquidtight conduit to a weather-proof outlet box, pool/spa equipment...

Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquidtight conduit to a weather-proof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL approved.Unit: BAG 1

Halex Reducing Bushing, 1 x 1/2 in Trade, Male x Female Connection, Steel, 0.76 in Length, 1.01 in ODUnit: EA

Halex Reducing Bushing, 1 x 1/2 in Trade, Male x Female Connection, Steel, 0.76 in Length, 1.01 in ODUnit: EA

Porcelain and steel. Used to secure the incoming service entrance wires. Mounts below the overhead service entrance cap. Tray boxed.Unit: EA

Porcelain and steel. Used to secure the incoming service entrance wires. Mounts below the overhead service entrance cap. Tray boxed.Unit: EA

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL listed.Unit: EA

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL listed.Unit: EA

Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL...

Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL Approved. Tray boxed.Unit: EA