HALEX COMPANY

Halex Conduit Connector, 3/8 in Trade, Screw Connection, Zinc, 1.31 in Length, Suitable for: 1/2 in KnockoutUnit: EA

Halex Conduit Connector, 3/8 in Trade, Screw Connection, Zinc, 1.31 in Length, Suitable for: 1/2 in KnockoutUnit: EA

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.Unit: BX100

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.Unit: BX100

Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. Concretetight. UL approved. Tray boxed.Unit: EA

Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. Concretetight. UL approved. Tray boxed.Unit: EA

Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.Unit: BAG 6

Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.Unit: BAG 6

Halex Conduit Coupling, 3/4 in Trade, Slip Joint Connection, PVCUnit: BAG

Halex Conduit Coupling, 3/4 in Trade, Slip Joint Connection, PVCUnit: BAG

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided...

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL listed and CSA certified.Unit: BAG 2

Halex Clamp Connector, 1-1/2 in Trade, Zinc, 2-61/64 in Length, 2 in Width, 1 in Height, Suitable for: 0.835 to 1.52 in Dia Non-Metallic Cable, Flex Cords, Multi-Flex Cords or (2) Conductor 4/0 SE...

Halex Clamp Connector, 1-1/2 in Trade, Zinc, 2-61/64 in Length, 2 in Width, 1 in Height, Suitable for: 0.835 to 1.52 in Dia Non-Metallic Cable, Flex Cords, Multi-Flex Cords or (2) Conductor 4/0 SE CablesUnit: EA

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.Unit: BAG 1

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.Unit: BAG 1

Halex Rigid Reducing Washer, 3/4 x 1/2 in Trade, SteelUnit: BAG4

Halex Rigid Reducing Washer, 3/4 x 1/2 in Trade, SteelUnit: BAG4

Indoor or outdoor applications. To support EMT conduit.Unit: BAG20

Indoor or outdoor applications. To support EMT conduit.Unit: BAG20

Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.Unit: BAG 5

Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.Unit: BAG 5

Halex Conduit Nipple, 1/2 x 2 in Trade, Threaded Connection, SteelUnit: EA

Halex Conduit Nipple, 1/2 x 2 in Trade, Threaded Connection, SteelUnit: EA

In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL listed.Unit: BX25 ...

In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL listed.Unit: BX25

Push-in style with captive locking wedge. Rigid PVC. Excellent strain relief and insulation. In a dry location, use to secure #14 to #10 non-metallic sheathed cable to steel outlet box or other...

Push-in style with captive locking wedge. Rigid PVC. Excellent strain relief and insulation. In a dry location, use to secure #14 to #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. Fits NM cable #14/2 to #10/3. Fits 1/2 in knockouts. UL, CSA listed.Unit: BAG 5

Zinc die-cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.Unit: BAG 1

Zinc die-cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.Unit: BAG 1

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.Unit: EA

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed.Unit: EA

Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL approved. Tray boxed.Unit: EA

Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL approved. Tray boxed.Unit: EA

Halex Reducing Washer, Steel, 1.11 in ID, 1-3/4 in OD, 0.0315 in ThicknessUnit: EA

Halex Reducing Washer, Steel, 1.11 in ID, 1-3/4 in OD, 0.0315 in ThicknessUnit: EA

Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.Unit: EA

Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.Unit: EA

Fits #14/2, #14/3, #12/2, #10/2, #10/3 NM cable. Snap-in, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal...

Fits #14/2, #14/3, #12/2, #10/2, #10/3 NM cable. Snap-in, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL listed, CSA certified.Unit: BAG10

Fits #14/2, #14/3, #12/2, #10/2, #10/3 NM cable. Snap-in, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal...

Fits #14/2, #14/3, #12/2, #10/2, #10/3 NM cable. Snap-in, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL listed, CSA certified.Unit: EA

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.Unit: BAG10

Indoor or outdoor use. Use to secure rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.Unit: BAG10

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL...

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.Unit: EA

Halex Quick-Set Connector, Trade Size: 3/8 in, Compression Connection, PVC, Gray, 2.37 in L, Suitable for: Type B Non-Metallic Liquidtight ConduitUnit: BAG

Halex Quick-Set Connector, Trade Size: 3/8 in, Compression Connection, PVC, Gray, 2.37 in L, Suitable for: Type B Non-Metallic Liquidtight ConduitUnit: BAG