FORNEY INDUSTRIES

General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals....

General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A.Unit: CS 4

Forney Cut-Off Wheel, Aluminum Oxide Abrasive, 50 Grit, Coarse Grit Grade, 7/8 in Arbor, 13,580 rpm Speed, 6 in Diameter, 0.08 in Thickness, Applicable Materials: Metal, Suitable for: Angle...

Forney Cut-Off Wheel, Aluminum Oxide Abrasive, 50 Grit, Coarse Grit Grade, 7/8 in Arbor, 13,580 rpm Speed, 6 in Diameter, 0.08 in Thickness, Applicable Materials: Metal, Suitable for: Angle GrinderUnit: EA

4-1/2 in with 7/8 in arbor. For right angle grinders. Cuts fast and outlasts sanding discs. Multiple layers of zirconia cloth flaps constantly exposing new extra sharp grinding points. Laminated by...

4-1/2 in with 7/8 in arbor. For right angle grinders. Cuts fast and outlasts sanding discs. Multiple layers of zirconia cloth flaps constantly exposing new extra sharp grinding points. Laminated by state-of-the-art automated equipment. Reinforced fiberglass backing plate. Each disc balance tested for vibration-free grinding/finishing. Wheel size: 4-1/2 in, arbor 7/8 in, maximum rpm: 13,300, tool type: right angle grinder.Unit: EA

Includes two barbed hose nipples, two hose ferrules, one each oxygen and acetylene 9/16-18 hose nuts and "B" fittings.Unit: EA

Includes two barbed hose nipples, two hose ferrules, one each oxygen and acetylene 9/16-18 hose nuts and "B" fittings.Unit: EA

Forney High-Pressure Hose, 1/4 in Nominal, 25 ft Length, 3000 psi Pressure, 140 deg F, RubberUnit: EA

Forney High-Pressure Hose, 1/4 in Nominal, 25 ft Length, 3000 psi Pressure, 140 deg F, RubberUnit: EA

E71T-GS flux core MIG (GMAW) welding wire for mild steel is a self-shielded mild steel all position flux cored MIG welding wire. Well-suited to single pass applications with high travel speed....

E71T-GS flux core MIG (GMAW) welding wire for mild steel is a self-shielded mild steel all position flux cored MIG welding wire. Well-suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel. Pink color coding on label.Unit: EA

Forney Quick Coupler, 1/4 x M22 in Connection, FNPT Connection, 5800 psi Pressure, 300 deg FUnit: EA

Forney Quick Coupler, 1/4 x M22 in Connection, FNPT Connection, 5800 psi Pressure, 300 deg FUnit: EA

Reliable protection. Features heat- and abrasion resistant reinforced patches in key strategic areas for added protection. 5-inch split leather reinforced safety cuffs. Heat resistant synthetic...

Reliable protection. Features heat- and abrasion resistant reinforced patches in key strategic areas for added protection. 5-inch split leather reinforced safety cuffs. Heat resistant synthetic thread stitching and self welted seams provide extra strength and durability.Unit: EA

Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.Unit: EA

Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.Unit: EA

Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability...

Extended gauntlet safety cuff offers extra wrist and forearm protection. Cotton lining for moisture absorption. Self-hemmed welting's in seams to provide extra strength to seams adding durability and strength to the glove. Forney's emblem imprint on glove.Unit: EA

Zirconium grain, premium metal grinding wheel. Ideal for metal grinding, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials.Unit: EA

Zirconium grain, premium metal grinding wheel. Ideal for metal grinding, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials.Unit: EA

E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low...

E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806).Unit: EA

Designed for most stationary bench grinders. For general grinding and sharpening applications on mild steel. Not for carbide applications.Unit: EA

Designed for most stationary bench grinders. For general grinding and sharpening applications on mild steel. Not for carbide applications.Unit: EA

8-1/2 in (215.9 mm) long brass body with fiberglass cover and trigger. Accepts up to #2 welding cable and 3/16 in (4.76 mm) electrodes. Provides excellent conductivity and durability. Insulated for...

8-1/2 in (215.9 mm) long brass body with fiberglass cover and trigger. Accepts up to #2 welding cable and 3/16 in (4.76 mm) electrodes. Provides excellent conductivity and durability. Insulated for safety and maximum operator protection. Grooved jaws allow electrodes to be used at different angles for greater comfort and efficiency.Unit: EA

Ideal for heavy-duty general-purpose cleaning. Strong and durable with solidly imbedded stainless steel bristles. Stainless steel is recommended when brushing corrosion-resistant or non-ferrous...

Ideal for heavy-duty general-purpose cleaning. Strong and durable with solidly imbedded stainless steel bristles. Stainless steel is recommended when brushing corrosion-resistant or non-ferrous metals such as stainless or aluminum or when the brush is being used in a wet environment. 7-3/4 in long wood handle with pre-drilled hang hole. Features 0.006 in stainless steel wire in 3 x 7 rows.Unit: EA

Versatile Victor compatible oxygen regulator for medium-duty applications. Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities....

Versatile Victor compatible oxygen regulator for medium-duty applications. Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities. Pressed, not soldered, joints for easy maintenance. Easy to read dual scale gauges with nearly unbreakable screw-on-lenses. Includes a safety relief valve for safe operation. Included in "Forney" 01705 (sku #890.9442), "Shop Flame II" and 01707 " Deluxe" oxy-acetylene welding kits.Unit: EA

5/8-11 replacement spindle nut for Forney 72321, 72322 and 72323 backing pads for sanding discs and buffing bonnets. Maximum speed rating of 20,000 rpm.Unit: EA

5/8-11 replacement spindle nut for Forney 72321, 72322 and 72323 backing pads for sanding discs and buffing bonnets. Maximum speed rating of 20,000 rpm.Unit: EA

Aluminum oxide metal cut-off wheels. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on angle...

Aluminum oxide metal cut-off wheels. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on angle grinders with proper adapters.Unit: EA

8 in (203.2 mm) long with 1-3/4 in (44.4 mm) wide jaw opening. Accepts up to #2 welding cable. Rugged, economical ground clamp for shop maintenance and field work. Good positive connection. Suitable...

8 in (203.2 mm) long with 1-3/4 in (44.4 mm) wide jaw opening. Accepts up to #2 welding cable. Rugged, economical ground clamp for shop maintenance and field work. Good positive connection. Suitable for all farm and shop welders.Unit: EA

Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper-rated for 100% conductivity. Carded 2 PK.Unit: PK 2

Carefully manufactured for sound, solid connections and trouble-free service. Easily crimped or swaged. Made from electrolytic copper-rated for 100% conductivity. Carded 2 PK.Unit: PK 2

Strong and durable with solidly imbedded stainless steel bristles. Stainless steel is recommended when brushing corrosion-resistant or non-ferrous metals such as stainless or aluminum or when the...

Strong and durable with solidly imbedded stainless steel bristles. Stainless steel is recommended when brushing corrosion-resistant or non-ferrous metals such as stainless or aluminum or when the brush is being used in a wet environment. 10-1/4 in long wood shoe handle with pre-drilled hang hole. Features 0.014 in stainless steel wire in 4 x 16 rows.Unit: EA

Forney E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other...

Forney E7018 is a low hydrogen, electrode recommended for welding applications involving structural steel, construction, pressure vessels, boilers, pipes, bridges, power plants, naval and other high-strength steels where hydrogen control is imperative. This electrode displays a stable arc, smooth and finely rippled bead pattern and easy slag removal.Unit: EA

Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy-duty shell end where the tip takes the most abuse. Larger diameter decreases preheat time and...

Features copper shells machined from solid bar stock (not tubing). Thick shell flange. Extra heavy-duty shell end where the tip takes the most abuse. Larger diameter decreases preheat time and maintains the cut on painted or rusty plates. Course "V" splines which cuts better, resists clogs and makes cleaning easier. Medium-duty tips fit "Forney" 1680, 1702, 1705, 1707 and 1753 torch kits and "Victor" compatible equipment.Unit: EA

Flap wheel, 1/4 in shank-mounted, featuring durable, high-grade aluminum oxide coating for aggressive cleaning and refinishing on most wood or metal surfaces. Ideal for mounting on power drills or...

Flap wheel, 1/4 in shank-mounted, featuring durable, high-grade aluminum oxide coating for aggressive cleaning and refinishing on most wood or metal surfaces. Ideal for mounting on power drills or other chuck driven machines. Carded.Unit: EA