FORNEY INDUSTRIES

Includes two barbed hose splicers and four hose ferrules.Unit: EA

Includes two barbed hose splicers and four hose ferrules.Unit: EA

Includes four replacement triangles for a total of 12 flints.Unit: EA

Includes four replacement triangles for a total of 12 flints.Unit: EA

Forney Cut-Off Wheel, Aluminum Oxide/Metal Abrasive, 7/8 in Arbor, 13,580 rpm Speed, 4-1/2 in Diameter, 1/8 in Thickness, Applicable Materials: Ferrous Material, Suitable for: Angle GrinderUnit: EA ...

Forney Cut-Off Wheel, Aluminum Oxide/Metal Abrasive, 7/8 in Arbor, 13,580 rpm Speed, 4-1/2 in Diameter, 1/8 in Thickness, Applicable Materials: Ferrous Material, Suitable for: Angle GrinderUnit: EA

Forney Welding Kit, Compatible, Medium Duty, Oxygen-Acetylene, Number of Pieces: 10, Includes: Oxygen Regulator (Cat. No. 87090), Acetylene Regulator (Cat. No. 87091), Torch Handle (Cat. No. 87093),...

Forney Welding Kit, Compatible, Medium Duty, Oxygen-Acetylene, Number of Pieces: 10, Includes: Oxygen Regulator (Cat. No. 87090), Acetylene Regulator (Cat. No. 87091), Torch Handle (Cat. No. 87093), Cutting Attachment (Cat. No. 87092), Goggles (Cat. No. 55311), Flint Lighter (Cat. No. 86102), T-Grade Hose (Cat. No. 86164), Cutting Tip NO 0 (Cat. No. 60447), Welding Tip NO 0 (Cat. No. 87822) and Check Valves (Cat. No. 87151)Unit: EA

General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals....

General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A.Unit: EA

Replacement flints for single flint striker. Fits "Forney" 86102 (Sku #891.2586) and all standard screw-on type lighters. 5 PK.Unit: EA

Replacement flints for single flint striker. Fits "Forney" 86102 (Sku #891.2586) and all standard screw-on type lighters. 5 PK.Unit: EA

For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Melting temperature of 575 deg F (299 deg...

For sweat fittings, sheet metal joints, gutter work and other big jobs. Works well on galvanized sheet, copper, steel, nickel plate, brass and tin plate. Melting temperature of 575 deg F (299 deg C). Not for electrical connections.Unit: EA

Shank mounted points and grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Ideal for grinding, polishing or deburring ferrous metals or other hard surfaces. Especially useful...

Shank mounted points and grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Ideal for grinding, polishing or deburring ferrous metals or other hard surfaces. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.Unit: EA

0.035 in (0.89 mm) x 1 in (25.4 mm) Forney, Tweco, Binzel and Clarke compatible contact tip. Precision machined. Fits Forney 304, 306 and 308 MIG welders and Tweco, Binzel and Clarke MIG guns....

0.035 in (0.89 mm) x 1 in (25.4 mm) Forney, Tweco, Binzel and Clarke compatible contact tip. Precision machined. Fits Forney 304, 306 and 308 MIG welders and Tweco, Binzel and Clarke MIG guns. 4-pack. Single pack is Forney 85348.Unit: EA

Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.Unit: EA

Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.Unit: EA

Tin-antimony lead-free solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required.Unit: EA ...

Tin-antimony lead-free solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required.Unit: EA

Aluminum oxide steel resin fiber disc with 7/8 in (22.23 mm) arbor, 13,300 max rpm, 3 pack. Ideal for weld grinding, grinding, blending, finishing, deburring and other general purpose applications....

Aluminum oxide steel resin fiber disc with 7/8 in (22.23 mm) arbor, 13,300 max rpm, 3 pack. Ideal for weld grinding, grinding, blending, finishing, deburring and other general purpose applications. Can be used on most types of steel, as well as fiberglass and plastics. Constructed with a heavy vulcanized fiber back, coated with abrasive grains and bonded together with a tough, heat-resistant resin for fast cutting action and long life. For use on right angle grinders.Unit: EA

Can be used to replace or add sanding sleeves to Forney Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.Unit: EA

Can be used to replace or add sanding sleeves to Forney Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.Unit: EA

Medium-duty Harris compatible oxy-acetylene cutting tip. Fits Forney 01687 torch kit and similar Harris compatible medium-duty equipment.Unit: EA

Medium-duty Harris compatible oxy-acetylene cutting tip. Fits Forney 01687 torch kit and similar Harris compatible medium-duty equipment.Unit: EA

Highly flexible cable manufactured with 1007 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket...

Highly flexible cable manufactured with 1007 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600 V. Conductor temperature range of -58 deg F (-50 deg C) to 221 deg F (105 deg C). Meets or exceeds ASTMB-172. 50 ft (15.24 m) reel.Unit: EA

Stem-mounted 4 in 'fine' wire wheel brush with 1/4 in hex shank. Designed for easy access into narrow holes and confined areas. Crimped style for light to medium duty applications. Removes rust,...

Stem-mounted 4 in 'fine' wire wheel brush with 1/4 in hex shank. Designed for easy access into narrow holes and confined areas. Crimped style for light to medium duty applications. Removes rust, scale and paint in hard to reach areas. Use with any 1/4 in Dia electric power drills or 01990 pneumatic (air) drill.Unit: EA

Great for cleaning metal surfaces, blending surfaces, removing light burrs, paint, rust and corrosion. Used for light to medium duty brushing action in areas that regular width brushes will not...

Great for cleaning metal surfaces, blending surfaces, removing light burrs, paint, rust and corrosion. Used for light to medium duty brushing action in areas that regular width brushes will not reach.Unit: EA

Cylindrical mounted rotary file with rounded end, flat top and 1/4 in shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze,...

Cylindrical mounted rotary file with rounded end, flat top and 1/4 in shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum speed rating of 2500 rpm.Unit: EA

E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent...

E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A.Unit:...

Forney Sanding Drum Kit, Rubber Backing, Brown, Medium Grit Grade, 1/2 in Diameter Drum, 1/2 in Drum Length, Includes: Mounted Rubber Drum with 1/8 in Shaft, Fine, Medium, Coarse Grit Sanding...

Forney Sanding Drum Kit, Rubber Backing, Brown, Medium Grit Grade, 1/2 in Diameter Drum, 1/2 in Drum Length, Includes: Mounted Rubber Drum with 1/8 in Shaft, Fine, Medium, Coarse Grit Sanding SleevesUnit: EA

Includes two barbed hose nipples, two hose ferrules, one each oxygen and acetylene 9/16-18 hose nuts and "B" fittings.Unit: EA

Includes two barbed hose nipples, two hose ferrules, one each oxygen and acetylene 9/16-18 hose nuts and "B" fittings.Unit: EA

Aluminum oxide metal cut-off wheels. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air...

Aluminum oxide metal cut-off wheels. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only.Unit: EA

High carbon steel (cross peen) chipping hammer. Tempered chisel on one end and point on the other. Black. Durable. All-purpose. Shockproof handle with loop for belthook.Unit: EA

High carbon steel (cross peen) chipping hammer. Tempered chisel on one end and point on the other. Black. Durable. All-purpose. Shockproof handle with loop for belthook.Unit: EA

Aluminum oxide steel resin fiber disc with 7/8 in (22.23 mm) arbor, 8,500 max rpm, 3 pack. Ideal for grinding, weld grinding, blending, finishing, deburring and other general purpose applications....

Aluminum oxide steel resin fiber disc with 7/8 in (22.23 mm) arbor, 8,500 max rpm, 3 pack. Ideal for grinding, weld grinding, blending, finishing, deburring and other general purpose applications. Can be used on most types of steel, as well as fiberglass and plastics. Constructed with a heavy vulcanized fiber back, coated with abrasive grains and bonded together with a tough, heat-resistant resin for fast cutting action and long life. For use on right angle grinders.Unit: EA