FLAIR-IT

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone...

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK™ part numbers come retail bagged fitting plus rings.Unit: EA

1/2 in x 3/8 in compression. Connects 1/2 in pex or polybutylene and 3/8 in compression.Unit: EA

1/2 in x 3/8 in compression. Connects 1/2 in pex or polybutylene and 3/8 in compression.Unit: EA

Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi approved for behind the wall and underground applications. Patent pending.Unit: EA

one of the largest and most diversified lines of PEX tools that includes both domestic and import, stainless steel clamp (SSC) and copper ring, one-handed, compact, long-handle and composite handle...

one of the largest and most diversified lines of PEX tools that includes both domestic and import, stainless steel clamp (SSC) and copper ring, one-handed, compact, long-handle and composite handle crimp tools, pipe cutters and ring/clamp removal tools.Unit: EA

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.Unit: EA

Flair-It PEXLOCK Pipe Elbow, Nominal Size: 1/2 in, FPT Connection, Angle: 90 deg, Suitable for: PEX or Polybutylene TubingUnit: EA

Flair-It PEXLOCK Pipe Elbow, Nominal Size: 1/2 in, FPT Connection, Angle: 90 deg, Suitable for: PEX or Polybutylene TubingUnit: EA

one of the largest and most diversified lines of PEX tools that includes both domestic and import, stainless steel clamp (SSC) and copper ring, one-handed, compact, long-handle and composite handle...

one of the largest and most diversified lines of PEX tools that includes both domestic and import, stainless steel clamp (SSC) and copper ring, one-handed, compact, long-handle and composite handle crimp tools, pipe cutters and ring/clamp removal tools.Unit: EA

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With white markings. Bar coded.Unit: EA ...

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With white markings. Bar coded.Unit: EA

Used for inserting a plug into the end of a pipe. Bar coded.Unit: EA

Used for inserting a plug into the end of a pipe. Bar coded.Unit: EA

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK clamp, anyone can...

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK part numbers come retail bagged fitting plus rings.Unit: EA

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone...

Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK™ part numbers come retail bagged fitting plus rings.Unit: EA

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending.Unit: EA

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending.Unit: EA

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending.Unit: EA

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.Unit: EA

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...

Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.Unit: EA

Used for inserting a plug into the end of a pipe. Bar coded.Unit: EA

Used for inserting a plug into the end of a pipe. Bar coded.Unit: EA

Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,...

Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi patent pending.Unit: EA

Flair-It Specialty Wrench, 1/2 x 3/4 in, PlasticUnit: EA

Flair-It Specialty Wrench, 1/2 x 3/4 in, PlasticUnit: EA

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.Unit: EA

1/2 in x 3/8 in compression. Connects 1/2 in pex or polybutylene and 3/8 in compression. No special tools required.Unit: EA

1/2 in x 3/8 in compression. Connects 1/2 in pex or polybutylene and 3/8 in compression. No special tools required.Unit: EA

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA ...

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.Unit: EA

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA ...

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA