Products 1-24 of 114
Show
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG4998092 -
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.Unit: EA
Availability: Out of Stock
Item #: VORG5484381 -
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone...
Until now, the PEX industry has been limited in it's ability to grow because of the need for special expensive tooling required by the metal PEX connection clamps. With the PEXLOCK™ clamp, anyone can plumb with PEX using just a pair of common household pliers. All PEXLOCK™ part numbers come retail bagged fitting plus rings.Unit: EA
Availability: Out of Stock
Item #: VORG5483953 -
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG7411036 -
Used for capping off PEX fittings. Bar coded.Unit: EA
Used for capping off PEX fittings. Bar coded.Unit: EA
Availability: Out of Stock
Item #: VORG5483888 -
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.Unit: EA
Availability: Out of Stock
Item #: VORG5484423 -
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included...
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg. F at 100 psi. Patent Pending.Unit: EA
Availability: Out of Stock
Item #: VORG5484118 -
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG8963993 -
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG4686150 -
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. Bar coded.Unit: EA
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. Bar coded.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG2836252 -
Flair-It Pipe Cutter, Maximum Pipe/Tube Diameter: 3/4 inUnit: EA
Flair-It Pipe Cutter, Maximum Pipe/Tube Diameter: 3/4 inUnit: EA
Availability: Out of Stock
Item #: VORG5484159 -
Made of PPSU (polysulfone). Works on all brands of PEX pipe. CNSF-14, CNSF-61, CSA compliant. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground...
Made of PPSU (polysulfone). Works on all brands of PEX pipe. CNSF-14, CNSF-61, CSA compliant. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG5748405 -
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG0481093 -
For hot or cold water In-line valve with PEX connections on both ends. Bar coded.Unit: EA
For hot or cold water In-line valve with PEX connections on both ends. Bar coded.Unit: EA
Availability: Out of Stock
Item #: VORG5484415 -
Use to install shut-off in straight pipe run. Made of PPSU (polysulfone). Works on all Brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,...
Use to install shut-off in straight pipe run. Made of PPSU (polysulfone). Works on all Brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi patent pending.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG5438429 -
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.Unit: EA
Availability: Out of Stock
Item #: VORG5483870 -
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.Unit: EA
Availability: Out of Stock
Item #: VORG5484142 -
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG2484749 -
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.Unit: EA
Availability: Out of Stock
Item #: VORG5484555 -
Flair-It Bypass Valve, 1/2 x 1/2 x 1/2 in Connection, PEX Connection, 100 psi, Temperature Rating: 180 deg F, Body Material: Polysulfone, Includes: (4) ClampsUnit: EA
Flair-It Bypass Valve, 1/2 x 1/2 x 1/2 in Connection, PEX Connection, 100 psi, Temperature Rating: 180 deg F, Body Material: Polysulfone, Includes: (4) ClampsUnit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG9060625 -
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal. Flair-It fittings are available in 3/8 to 3/4 in and are stocked in bulk and barcoded versions. Must be ordered in lots of ten. Starter kits are also available. Valves are directional.Unit: EA
Availability: Out of Stock
Item #: VORG5484373 -
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included...
Made of PPSU (polysulfone). Works on all brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. CNSF-14, CNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi. Approved for behind the wall and underground applications. Patent pending. Black.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG8120636 -
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings...
Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term seal.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG3541216 -
Used for inserting a plug into the end of a pipe. Bar coded.Unit: EA
Used for inserting a plug into the end of a pipe. Bar coded.Unit: EA
Availability: Home Delivery or Ship to Store For Pick Up
Item #: VORG9149295 -
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA ...
For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.Unit: EA