CARLON

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.Unit: EA

Fold and snap together. No cement, set screws or locknuts. For 600 V use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade....

Fold and snap together. No cement, set screws or locknuts. For 600 V use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concretetight when used with Carlon ENT. UL listed.Unit: EA

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA

With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4 to 3 in, six integral clamps. 4 in Dia non-metallic ceiling box, 20 cu-in volume. Listed for fixture support up to 50 lb. 4 in...

With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4 to 3 in, six integral clamps. 4 in Dia non-metallic ceiling box, 20 cu-in volume. Listed for fixture support up to 50 lb. 4 in Dia x 2-1/4 in D. Meets NEMA OS-2, UL listed and RoHS compliance.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL listed.Unit: EA

Quick connect, fold and snap together. No cement, set screws or locknuts. For 600 V use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors...

Quick connect, fold and snap together. No cement, set screws or locknuts. For 600 V use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concretetight when used with Carlon ENT. UL listed.Unit: EA

With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall...

With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.Unit: EA

The Carlon SuperBlue hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially...

The Carlon SuperBlue hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon SuperBlue boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wirefill capacity in their class and come with molded-in...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.Unit: EA

Weather resistant cover for double toggle switch applications. Vertical mount. UV-resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine listed, CSA...

Weather resistant cover for double toggle switch applications. Vertical mount. UV-resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine listed, CSA certified.Unit: EA

For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA ...

For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA

Non-metallic white ceiling box cover, flat and blank. 4 in Dia. UL listed.Unit: EA

Non-metallic white ceiling box cover, flat and blank. 4 in Dia. UL listed.Unit: EA

Elbow, 1 in Trade, 90 deg Angle, SCH 80 Schedule, PVC, Dimensions: 1.316 in OD, Plain End Connection, Gray, Suitable for: Non-Metallic Solvent Weld FittingUnit: EA

Elbow, 1 in Trade, 90 deg Angle, SCH 80 Schedule, PVC, Dimensions: 1.316 in OD, Plain End Connection, Gray, Suitable for: Non-Metallic Solvent Weld FittingUnit: EA

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as...

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as described in the National Electrical Code.Unit: EA

Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial...

Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.Unit: COIL

Carlon's Snap Strap offers a unique support strap designed especially for the installation of PVC conduit. Also suitable for installations of rigid steel. This high-strength, non-metallic clamp...

Carlon's Snap Strap offers a unique support strap designed especially for the installation of PVC conduit. Also suitable for installations of rigid steel. This high-strength, non-metallic clamp allows conduit to expand and contract freely, eliminating the bowing commonly seen from the expansion and contraction of conduit caused by varying temperature changes. Finished installations have a neat, attractive appearance on exposed applications.Unit: EA

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as...

Carlon manufactures the most complete line of non-metallic conduit fittings in the electrical industry. Carlon Plus 40 and Plus 80 conduits are designed for use aboveground and underground as described in the National Electrical Code.Unit: EA

Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed. 2.63 in H x 1.31 in W opening.Unit: EA

Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed. 2.63 in H x 1.31 in W opening.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.Unit: EA

Suitable for paneling masonry, plaster, sheetrock, tile and all wall coverings. Brilliant electric blue. UL listed.Unit: EA

Suitable for paneling masonry, plaster, sheetrock, tile and all wall coverings. Brilliant electric blue. UL listed.Unit: EA

The Carlon SuperBlue hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially...

The Carlon SuperBlue hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon SuperBlue boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wirefill capacity in their class and come with molded-in...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.Unit: EA