CAMPBELL CHAIN

Do not exceed working load limit.Unit: L FT

Do not exceed working load limit.Unit: L FT

DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.Unit: EA

DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.Unit: EA

Designed to be used with Grade 43 or Grade 30 chain. Heat treated pins. Hooks are heat treated and tempered. Hooks embossed with chain grade, fractional size and country of origin. Hooks embossed...

Designed to be used with Grade 43 or Grade 30 chain. Heat treated pins. Hooks are heat treated and tempered. Hooks embossed with chain grade, fractional size and country of origin. Hooks embossed with trace code providing traceability through manufacturing and testing process to heat of steel. Design ultimate strength equals 3 times working load limit, matching NACM specifications. Grab hooks are designed to grab a single link of chain on the side to form a loop for dragging, pulling or...

Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or Tie Down chains and logging chains. Low carbon steel standard material. Do not...

Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or Tie Down chains and logging chains. Low carbon steel standard material. Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.Unit: L FT

Campbell Chain Connector, Ball, ChromeUnit: BAG6

Campbell Chain Connector, Ball, ChromeUnit: BAG6

Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and...

Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.Unit: EA

Two cable ferrules and two cable stops. Made from aluminum. Do not use on coated cable.Unit: EA

Two cable ferrules and two cable stops. Made from aluminum. Do not use on coated cable.Unit: EA

Campbell Plumbers Chain, Working Load Limit: 35 lb, Trade Size: 1/0, Brass, Bright, Gold, Material Diameter: 13/64 in, 200 ft LUnit: L FT

Campbell Plumbers Chain, Working Load Limit: 35 lb, Trade Size: 1/0, Brass, Bright, Gold, Material Diameter: 13/64 in, 200 ft LUnit: L FT

Unit: EA

Unit: EA

Unit: EA

Unit: EA

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end...

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.Unit: EA

Campbell Pulley, Single Sheave, Working Load Limit: 100 lb, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall MountingUnit: EA

Campbell Pulley, Single Sheave, Working Load Limit: 100 lb, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall MountingUnit: EA

Unit: EA

Unit: EA

Unit: EA

Unit: EA

Unit: EA

Unit: EA

Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or Tie Down chains and logging chains. Low carbon steel standard material. Do not...

Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or Tie Down chains and logging chains. Low carbon steel standard material. Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.Unit: L FT

Unit: EA

Unit: EA

Unit: EA

Unit: EA

Do not exceed working load limit.Unit: L FT

Do not exceed working load limit.Unit: L FT

For general utility, farm and animal applications. Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components...

For general utility, farm and animal applications. Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.Unit: L FT

Campbell Twist Chain, Working Load Limit: 5 lb, Trade Size: 90, Inside Link Width: 0.12 in, Inside Link Length: 0.21 in, Nickel, Material Diameter: 0.056, 82 ft LUnit: L FT

Campbell Twist Chain, Working Load Limit: 5 lb, Trade Size: 90, Inside Link Width: 0.12 in, Inside Link Length: 0.21 in, Nickel, Material Diameter: 0.056, 82 ft LUnit: L FT

Do Not use on coated cable, if used on coated cable, remove coating from assembly area.Unit: EA

Do Not use on coated cable, if used on coated cable, remove coating from assembly area.Unit: EA

Unit: EA

Unit: EA

Use for tailgates barrier guards, animal ties. Low carbon steel, not heat treated. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or...

Use for tailgates barrier guards, animal ties. Low carbon steel, not heat treated. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.Unit: L FT