CAMPBELL CHAIN

Campbell Pulley, Single Sheave, Working Load Limit: 50 lb, Eye Diameter: 5/8 in, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Brass, Block Material: Zinc, Nickel

Campbell Pulley, Single Sheave, Working Load Limit: 50 lb, Eye Diameter: 5/8 in, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Brass, Block Material: Zinc, Nickel

Ratchet load binder used to tighten chain, typically for cargo securement. 8 in take-up. For chain size 5/16 in (System 7) and for chain size 3/8 in (System 4) Meets U.S. D.O.T. 393.100-393.102...

Ratchet load binder used to tighten chain, typically for cargo securement. 8 in take-up. For chain size 5/16 in (System 7) and for chain size 3/8 in (System 4) Meets U.S. D.O.T. 393.100-393.102 requirements for use with chain. Do not use for overhead lifting or hoisting or exceed the working load limit.Color=RedWLL Lb=5400RATCHET TYPEUnit: EA

Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and...

Warning, use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. Do not use round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.Zinc Plated - UPC Tagged BulkSize In=1/4WLL Ton=1/2SCREW PINFORGED...

DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.UPC TAGGED BULKZinc...

DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.UPC TAGGED BULKZinc Plated - Grade 43 SteelSize In=1/4WLL lb=2,600CLEVIS - FORGEDUnit: EA

Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Carbon Steel, Poly-Coated, White, Material Diameter: 9/64 in, 125 ft LPolycoated White FinishTrade Size In=2/0Lgth Ft=125WLL...

Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Carbon Steel, Poly-Coated, White, Material Diameter: 9/64 in, 125 ft LPolycoated White FinishTrade Size In=2/0Lgth Ft=125WLL lb=255LOW-CARBON STEELUnit: REEL

Do not exceed working load limit.EXTRA FLEXIBLE 7 x 19 CONSTRUCTIONElectro-Polish - 250' Reel- SSSize In=1/4WLL lb=1,280HIGH-STRENGTH - GALVANIZEDUnit: EA ...

Do not exceed working load limit.EXTRA FLEXIBLE 7 x 19 CONSTRUCTIONElectro-Polish - 250' Reel- SSSize In=1/4WLL lb=1,280HIGH-STRENGTH - GALVANIZEDUnit: EA

Do not exceed working load limit.FLEXIBLE 7 x 7 CONSTRUCTIONUncoated - 500' ReelSize In=1/8WLL lb=96HIGH-STRENGTH - GALVANIZEDUnit: REEL

Do not exceed working load limit.FLEXIBLE 7 x 7 CONSTRUCTIONUncoated - 500' ReelSize In=1/8WLL lb=96HIGH-STRENGTH - GALVANIZEDUnit: REEL

Do Not use on coated cable, if used on coated cable, remove coating from assembly area.UPC Tagged BulkCable Size Ins.=3/32 to 1/8MALLEABLE IRON - GALVANIZEDUnit: EA ...

Do Not use on coated cable, if used on coated cable, remove coating from assembly area.UPC Tagged BulkCable Size Ins.=3/32 to 1/8MALLEABLE IRON - GALVANIZEDUnit: EA

High-strength steel. Thermal heat-treated for superior strength. Meets FMCSA, CVSA, NACM & ASTM requirements. Chain Links 100% proof tested. 4:1 design factor vs 3:1 for webbing. No worries...

High-strength steel. Thermal heat-treated for superior strength. Meets FMCSA, CVSA, NACM & ASTM requirements. Chain Links 100% proof tested. 4:1 design factor vs 3:1 for webbing. No worries concerning ultra-violet degrading. Gold finish for quick recognition.Size- 3/8" x 20'WLL Lb=6600CLEVIS GRAB HOOKGRADE 70Unit: EA

"For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or...

"For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain 1/4"" x 5/16""; Opening = 7/16 Pin = 3/8"". No. T5423301 For chain 3/8""; Opening = 1/2"" Pin = 7/16"""ZINC PLATEDUPC Tagged BulkWdth x Lgth In=1-5/16 x 3-5/8WLL lb=5,400DOUBLE - FORGED STEELUnit: EA ...

Used for decorative and hobby/craft applications.#19 TRADE SIZE - BRASS PLATEDLgth Ft=82WLL Lb=3OVAL LINKUnit: REEL

Used for decorative and hobby/craft applications.#19 TRADE SIZE - BRASS PLATEDLgth Ft=82WLL Lb=3OVAL LINKUnit: REEL

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets, the...

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets, the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.Zinc CoatedTrade Size In=2Lgth Ft=125WLL...

Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting.Trade Size In=5/16WLL lb=1900EYE- FORGED STEELGRADE 43 - ZINC PLATEDUnit: EA ...

Do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting.Trade Size In=5/16WLL lb=1900EYE- FORGED STEELGRADE 43 - ZINC PLATEDUnit: EA

For hanging fixtures and plants, animal ties. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or...

For hanging fixtures and plants, animal ties. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.Blu-Krome (Electro-Galvanized) - ReelSize=0.135WLL lb=255HANDY LINKLOW-CARBON STEELUnit: REEL

Swag fittings, sleeves/stop for cable diameters 1/16 to 3/8 in.Cable Size Ins.=1/16ALUMINUMUnit: PK 50

Swag fittings, sleeves/stop for cable diameters 1/16 to 3/8 in.Cable Size Ins.=1/16ALUMINUMUnit: PK 50

Swag fittings, sleeves/stop for cable diameters 1/16 to 3/8 in.Cable Size Ins.=3/32ALUMINUMUnit: PK 50

Swag fittings, sleeves/stop for cable diameters 1/16 to 3/8 in.Cable Size Ins.=3/32ALUMINUMUnit: PK 50

For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit.ZINC PLATEDUPC Tagged BulkTrade Size In=3/8 x 1-5/8WLL lb=1250LOW-CARBON STEELUnit: EA ...

For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit.ZINC PLATEDUPC Tagged BulkTrade Size In=3/8 x 1-5/8WLL lb=1250LOW-CARBON STEELUnit: EA