Wall Channel- Wiremold

For transitioning from non-metallic raceway to conduit. Hides and organizes loose cords and wires.Unit: CD

For transitioning from non-metallic raceway to conduit. Hides and organizes loose cords and wires.Unit: CD

Fits over existing single gang outlet to feed power as the starting point for your system. 1 in D.Unit: EA

Fits over existing single gang outlet to feed power as the starting point for your system. 1 in D.Unit: EA

For most residential wiring.Unit: EA

For most residential wiring.Unit: EA

For most residential wiring.Unit: EA

For most residential wiring.Unit: EA

For making 90 deg right or left turns on a flat surface.Unit: CD 2

For making 90 deg right or left turns on a flat surface.Unit: CD 2

For making a 90 deg inside turn around a corner from wall-to-wall or wall-to-ceiling.Unit: EA

For making a 90 deg inside turn around a corner from wall-to-wall or wall-to-ceiling.Unit: EA

For making a 90 deg outside turn around a corner.Unit: CD

For making a 90 deg outside turn around a corner.Unit: CD

Mounting components for NM1 wire channel, including screws and anchors, wire clips and joint cover.Unit: CD

Mounting components for NM1 wire channel, including screws and anchors, wire clips and joint cover.Unit: CD

Accommodates 15 A (NEMA 5-15R) or 20 A (NEMA 5-20R) duplex devices in place of duplex grounding receptacle included. Cover has twist outs for 500 and 700 Series raceway on each end and sides....

Accommodates 15 A (NEMA 5-15R) or 20 A (NEMA 5-20R) duplex devices in place of duplex grounding receptacle included. Cover has twist outs for 500 and 700 Series raceway on each end and sides. Twistouts on ends of box permit running raceway close to interior trim. Base has 1/2 in trade size KOs.Unit: EA

Cover accepts fan bracket device with mounting centers of 3-3/16 in (81 mm). Base has six mounting holes and 4-1/2 in trade size KOs. #10 mounting studs provided. Rated for fans and fixtures up to...

Cover accepts fan bracket device with mounting centers of 3-3/16 in (81 mm). Base has six mounting holes and 4-1/2 in trade size KOs. #10 mounting studs provided. Rated for fans and fixtures up to 50 lb.Unit: EA

For standard shallow switches and receptacles including single-gang combination devices. Base has two 1/2 in trade size KOs. Accepts NEMA single-gang standard faceplates.Unit: EA

For standard shallow switches and receptacles including single-gang combination devices. Base has two 1/2 in trade size KOs. Accepts NEMA single-gang standard faceplates.Unit: EA

For deep switches and receptacles. Base has two 1/2 in trade size KOs. Accepts NEMA single-gang standard faceplates.Unit: EA

For deep switches and receptacles. Base has two 1/2 in trade size KOs. Accepts NEMA single-gang standard faceplates.Unit: EA