RAIN DRIP

Made from ABS. For water pressure up to 60 psi. Ends are color-coded for easy identification. For use with 1/2 in (0.620 to 0.630 in OD) hose only.Unit: EA

Made from ABS. For water pressure up to 60 psi. Ends are color-coded for easy identification. For use with 1/2 in (0.620 to 0.630 in OD) hose only.Unit: EA

Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.Unit: EA

Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.Unit: EA

Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or...

Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene.Unit: EA

Used to shut-off the end of 1/4 in tubing. Removes easily.Unit: CD 5

Used to shut-off the end of 1/4 in tubing. Removes easily.Unit: CD 5

Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.Unit: CD 2

Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.Unit: CD 2

Adjustable low-flow sprinkler heads. Waters two 30 deg patterns each with a radius up to 8 ft. Adjustable length of up to 16 ft x 4 ft. Sprayer inlet size of 10-32 NFT. Knob adjusts the flow (4 to...

Adjustable low-flow sprinkler heads. Waters two 30 deg patterns each with a radius up to 8 ft. Adjustable length of up to 16 ft x 4 ft. Sprayer inlet size of 10-32 NFT. Knob adjusts the flow (4 to 20 gph at 25 psi) and diameter of spray.Unit: CD

Swivel elbow assembly for 1/2 and 3/4 in riser. Converts 1/2 in sprinkler riser to a 1/2 in single drip manifold. Connects one 1/2 in poly hose to a 1/2 in sprinkler riser. Includes elbow, filter,...

Swivel elbow assembly for 1/2 and 3/4 in riser. Converts 1/2 in sprinkler riser to a 1/2 in single drip manifold. Connects one 1/2 in poly hose to a 1/2 in sprinkler riser. Includes elbow, filter, 3-way connector and two flow controls.Unit: EA

For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2GPH) - Ideal for heavy soil (clay). Black-(1GPH) - Ideal for medium soil(loam) Green...

For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2GPH) - Ideal for heavy soil (clay). Black-(1GPH) - Ideal for medium soil(loam) Green -(2GPH) Ideal for light soil (sandy).Unit: CD 10

Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.710 in hose.Unit: BAG50

Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.710 in hose.Unit: BAG50

Join or connect two lengths of line. Made from ABS. For water pressure up to 60 psi. Ends are color coded for easy size identification. 1/2 in compression coupling for use with 1/2 in (0.62 to 0.63...

Join or connect two lengths of line. Made from ABS. For water pressure up to 60 psi. Ends are color coded for easy size identification. 1/2 in compression coupling for use with 1/2 in (0.62 to 0.63 in OD) hose only.Unit: EA

Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water...

Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi.Unit: CD 5

Drip watering bubbler. Adjustable bubbler rotates easily to preferred water flow - from full coverage for shrubs and large potted trees to shut-off position.Unit: BAG

Drip watering bubbler. Adjustable bubbler rotates easily to preferred water flow - from full coverage for shrubs and large potted trees to shut-off position.Unit: BAG

Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.Unit: CD 20

Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose.Unit: CD 20

3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression...

3/4 in pipe thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to 3/4 in male pipe thread. Washer included. For use with 1/2 in (0.62 to 0.63 in OD) hose only. Green compression ring.Unit: CD

Drip watering flex vinyl pipe.Unit: EA

Drip watering flex vinyl pipe.Unit: EA

Designed for use on level ground and shorter circuits. Ideal for heavy soil (clay).Unit: BAG25

Designed for use on level ground and shorter circuits. Ideal for heavy soil (clay).Unit: BAG25

Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS.Unit: CD 1

Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS.Unit: CD 1

Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS. For circuits totaling up to 360 GPG.Unit: EA

Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS. For circuits totaling up to 360 GPG.Unit: EA

For flowers, ground cover and hillsides. Use with R382C, 382010, 384RO, 384ROU, R366C, 336005 and 336010.Unit: CD 10

For flowers, ground cover and hillsides. Use with R382C, 382010, 384RO, 384ROU, R366C, 336005 and 336010.Unit: CD 10

Swivel tee assembly for 1/2 in double drip manifold. Connects two 1/2 in poly hose to a 1/2 in sprinkler riser. Includes tee, filter, 3-way connector and 2 flow controls.Unit: EA

Swivel tee assembly for 1/2 in double drip manifold. Connects two 1/2 in poly hose to a 1/2 in sprinkler riser. Includes tee, filter, 3-way connector and 2 flow controls.Unit: EA

Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the...

Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the surface, in any weather. Great to hose made from reprocessed materials.Unit: COIL

Converts existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3...

Converts existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 to 13 gph at 30 psi for stream type and from 0 to 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large...

Join or connect two lengths of line. Made from ABS. For water pressure up to 60 psi. Ends are color coded for easy size identification. 5/8 in compression coupling for use with 5/8 in (0.69 to 0.7...

Join or connect two lengths of line. Made from ABS. For water pressure up to 60 psi. Ends are color coded for easy size identification. 5/8 in compression coupling for use with 5/8 in (0.69 to 0.7 in OD) hose only.Unit: EA

FIX-IT kit a great way to help Raindrip gardeners maintain their low-flow watering systems. Convenient, compact plastic case has sections holding the parts needed to repair, change or expand an...

FIX-IT kit a great way to help Raindrip gardeners maintain their low-flow watering systems. Convenient, compact plastic case has sections holding the parts needed to repair, change or expand an installation. The case is ideal for keeping leftovers, too. Spare parts can be stored in the reusable box for later use.Unit: PK