PETERSON MFG

Durable, black ABS housing with two snap-on amber lenses.Unit: CD

Durable, black ABS housing with two snap-on amber lenses.Unit: CD

Industry standard PL3 socket integrated into housing. 9 to 16 V operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 deg position. Suitable for over-80 in vehicle width...

Industry standard PL3 socket integrated into housing. 9 to 16 V operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 deg position. Suitable for over-80 in vehicle width applications. 7-diodes, LED oval. Kit contains light, grommet and plug. Proudly made in the USA.Unit: CD

Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens...

Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers.Unit: CD

Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80 in wide...

Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80 in wide applications. Exceeds DOT requirements for stop, turn, tail, rear and side reflector, side marker and rear clearance. Includes No.452 Belljar submersible lights, 25 ft trailer harness, 48 in trunk connector, plastic license bracket, all mounting hardware and installation instructions. Front side...

Provides all legal lighting and reflective equipment for any trailer less than 80 in W. Combination lights, of tough molded housing and lenses with phosphor bronze contacts for durability, exceed...

Provides all legal lighting and reflective equipment for any trailer less than 80 in W. Combination lights, of tough molded housing and lenses with phosphor bronze contacts for durability, exceed DOT requirements for stop, turn, tail, rear and side reflector, side marker and license illuminator. Side marker light has built-in reflector optics. Includes No.440 stop and tail combination lights, 2 No.114A side marker lights, 20 ft wire harness, 48 in trunk connector, license bracket, all mounting...

PM Piranha Clearance/Side Marker Light, 9 to 16 V, LED Lamp, Red Housing, 2-1/2 in Diameter, 0.9 in Width, Includes: (6) Clearance/Side Marker LightsUnit: CD

PM Piranha Clearance/Side Marker Light, 9 to 16 V, LED Lamp, Red Housing, 2-1/2 in Diameter, 0.9 in Width, Includes: (6) Clearance/Side Marker LightsUnit: CD

PM Stop, Stud Mounting, Plastic Housing Material, Black Housing, 2-5/8 in Width, 3-3/4 in Height, Includes: (3) Stop, Turn and Tail LightsUnit: EA

PM Stop, Stud Mounting, Plastic Housing Material, Black Housing, 2-5/8 in Width, 3-3/4 in Height, Includes: (3) Stop, Turn and Tail LightsUnit: EA

Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on...

Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker and side reflex. Features gaskets on both rear and side lenses. Grounds through mounting studs. Mounts on 2 in centers and includes mounting hardware.Unit: CD

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in...

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.Unit: CD

Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens...

Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers.Unit: CD

Convex round distortion free glass mirror in a corrosion free aluminum housing for passenger car mounting. Gives wide angle view. Weather-resistant adhesive back.Unit: CD

Convex round distortion free glass mirror in a corrosion free aluminum housing for passenger car mounting. Gives wide angle view. Weather-resistant adhesive back.Unit: CD

Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick-Lock" port to connect. Single wire for...

Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick-Lock" port to connect. Single wire for electrical connection. Features 15,000 hr long life bulb.Unit: CD

Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10 in lead wires. Universal stud mount with 1/4 in studs on 2 in centers. 3-3/4 in H x 2-5/8 in D...

Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10 in lead wires. Universal stud mount with 1/4 in studs on 2 in centers. 3-3/4 in H x 2-5/8 in D overall.Unit: CD

Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9 to 16 V operating range. Available for grommet mount, flush-mount or...

Sealed LED light functions as clearance, side marker or identification light. Accepts industry standard 2-prong plug. 9 to 16 V operating range. Available for grommet mount, flush-mount or surface-mount flange sonic welded to form a single unit. Includes LED light, mounting grommet and 162-49 plug.Unit: CD

Acrylic lens with adhesive backing easily mounts to any clean, flat surface. Contains 2 per card.Unit: EA

Acrylic lens with adhesive backing easily mounts to any clean, flat surface. Contains 2 per card.Unit: EA

Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.Unit: CD ...

Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.Unit: CD

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in...

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.Unit: CD

Acrylic lens in low-profile aluminum housing, completely rustproof. 3-15/16 in CTC mounting holes, 3-3/4 in H x 4-1/2 in W.Unit: CD

Acrylic lens in low-profile aluminum housing, completely rustproof. 3-15/16 in CTC mounting holes, 3-3/4 in H x 4-1/2 in W.Unit: CD

Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3...

Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D.Unit: CD

Sturdy plastic housing with a black finish. Brass socket and lexide lens gasket for long life. 5-1/2 in face Dia, 4-1/2 in Dia inset and 1-1/2 in D overall.Unit: CD

Sturdy plastic housing with a black finish. Brass socket and lexide lens gasket for long life. 5-1/2 in face Dia, 4-1/2 in Dia inset and 1-1/2 in D overall.Unit: CD

Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs....

Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers.Unit: EA

Corrosion-resistant, zinc-plated, painted with white baked enamel. Three 3-1/4 in x 1 in x 1-1/8 in #107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to...

Corrosion-resistant, zinc-plated, painted with white baked enamel. Three 3-1/4 in x 1 in x 1-1/8 in #107 compact lights attached to each bar. Lights have acrylic lenses that lock into base to protect against being knocked out. Mounts on 16-1/2 in centers and grounds through mounting hardware. 16-1/8 in W x 1 in H x 1-3/8 in D, 16-1/2 in L with mounting brackets.Unit: CD

PM Trailer Connector, Vehicle End: 4-Way FlatUnit: CD

PM Trailer Connector, Vehicle End: 4-Way FlatUnit: CD

Features durable Lexan lens and nylon push-button On/Off switch for long life. Separate ground wire supplied for mounting on non-metallic surfaces. 4-9/16 in W x 1-3/4 in H x 1-3/4 in D, mounts on...

Features durable Lexan lens and nylon push-button On/Off switch for long life. Separate ground wire supplied for mounting on non-metallic surfaces. 4-9/16 in W x 1-3/4 in H x 1-3/4 in D, mounts on 3-1/2 in x 1-1/2 in centers.Unit: EA