IRWIN

Heavy-gauge, high-carbon steel for extended life with precision ground teeth for smooth, accurate cuts, fully hardened plate runs truer longer.Unit: CD

Heavy-gauge, high-carbon steel for extended life with precision ground teeth for smooth, accurate cuts, fully hardened plate runs truer longer.Unit: CD

High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length.Unit: CD

High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length.Unit: CD

Irwin Impact Performance Series fastener drive bits are engineered for maximum durability and long life with impact drivers. These power bits are designed with precision tip geometry so they fit...

Irwin Impact Performance Series fastener drive bits are engineered for maximum durability and long life with impact drivers. These power bits are designed with precision tip geometry so they fit fasteners more precisely, which reduces stripping and cam-out. Manufactured with heavy-duty, cold-forged, high-grade steel, they'll withstand extremely high torque output and the black oxide finish resists corrosion and increases the life of the bit. They're designed with a 1/4 in quick-change shank,...

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as...

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.Unit: CD

Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained...

Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads.Unit: EA

Unit: EA

Unit: EA

Five bi-metal blades with high-speed steel cutting edge; spring steel body prevents breaking; blunted ends inhibit puncture wounds; speed tip penetrates easily; fits utility knife sku #:...

Five bi-metal blades with high-speed steel cutting edge; spring steel body prevents breaking; blunted ends inhibit puncture wounds; speed tip penetrates easily; fits utility knife sku #: 866.1902.Unit: PK 5

Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4 in quick change shank reduces slipping in standard chucks and is compatible with all 1/4 in quick change chucks, including...

Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4 in quick change shank reduces slipping in standard chucks and is compatible with all 1/4 in quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth.Unit: EA

M-2 high-speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications. Split point ensures a true start and eliminates bit walking.Unit: CD ...

M-2 high-speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications. Split point ensures a true start and eliminates bit walking.Unit: CD

The Irwin Speedbor MAX SPEED wood drilling bit is the fastest SPEEDBOR ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster,...

The Irwin Speedbor MAX SPEED wood drilling bit is the fastest SPEEDBOR ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.Unit: EA

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life....

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle.Unit: EA

The Irwin STRAIT-LINE Speedline Chalk reel features a features a fill door that is more than 70% larger than the previous design for quick and easy chalk fill. The 100 ft abrasion-resistant poly...

The Irwin STRAIT-LINE Speedline Chalk reel features a features a fill door that is more than 70% larger than the previous design for quick and easy chalk fill. The 100 ft abrasion-resistant poly line provides up to 6 strikes per pull. The reel has a 3:1 gear ratio to rewind the line 3X faster than traditional chalk reels.Unit: CD

Constructed from premium alloy steel with 82 deg point for fast boring, 18 in length and wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings...

Constructed from premium alloy steel with 82 deg point for fast boring, 18 in length and wire hole at the tip of the bit makes it easy to pull wire through in applications such as walls, ceilings and floors in a variety of materials for installation of small wire for telephones, cable, TV, computers and security systems.Unit: EA

Made of high-grade, heat-treated alloy steel for maximum toughness and durability. Replaces up to 16 wrench sizes. Heavy-duty jaws lock on to three sides of a hex fastener and will not slip or mar....

Made of high-grade, heat-treated alloy steel for maximum toughness and durability. Replaces up to 16 wrench sizes. Heavy-duty jaws lock on to three sides of a hex fastener and will not slip or mar. Turn screw to adjust pressure and fit work, stays adjusted for repetitive use. Classic trigger release provides maximum locking force. Includes a built-in wire cutter.Unit: CD

Chrome vanadium steel heat treated at full length for extra sharpness and long life in woodworking applications. The spurred cutting head reduces splintering and ensures a smooth clean hole, wide...

Chrome vanadium steel heat treated at full length for extra sharpness and long life in woodworking applications. The spurred cutting head reduces splintering and ensures a smooth clean hole, wide flutes provide a fast continuous flow of chips.Unit: CD

Thin kerf saw blades for cordless MARATHON saws. Face ground carbide teeth with aggressive hook angle for fast cuts. Alternate top bevel, 0.063 in kerf, 20 deg hook angle.Unit: CD

Thin kerf saw blades for cordless MARATHON saws. Face ground carbide teeth with aggressive hook angle for fast cuts. Alternate top bevel, 0.063 in kerf, 20 deg hook angle.Unit: CD

M-2 high-speed steel with black oxide coating for strength, heat resistance and wear resistance in general drilling of wood, metal and plastic. The 3/8 in reduced shank fits all 3/8 in drills while...

M-2 high-speed steel with black oxide coating for strength, heat resistance and wear resistance in general drilling of wood, metal and plastic. The 3/8 in reduced shank fits all 3/8 in drills while split point ensures a true start and eliminates bit walking.Unit: EA

Irwin Impact Performance Series lobular nutsetters are built for maximum durability, performance and long life with impact tools. They are designed to drive the fastener from the side, rather than...

Irwin Impact Performance Series lobular nutsetters are built for maximum durability, performance and long life with impact tools. They are designed to drive the fastener from the side, rather than forcing the corners to turn, maintaining the true shape of the fastener and dramatically reducing breakage and damage from stripping. The lobular design also provides more clearance on the corners of the fastener where paint build-up often occurs. They are available with or without powerful rare...

Irwin Unibit Step Drill Set, HSS, Number of Pieces: 3, Includes: #1, #2, #3 UnibitsUnit: EA

Irwin Unibit Step Drill Set, HSS, Number of Pieces: 3, Includes: #1, #2, #3 UnibitsUnit: EA

Carbide tipped bits used in masonry applications, 1/2 in Dia. Includes: 3/16 in, 1/4 in, 5/16 in, 3/8 in, 1/2 in and plastic case.Unit: CD

Carbide tipped bits used in masonry applications, 1/2 in Dia. Includes: 3/16 in, 1/4 in, 5/16 in, 3/8 in, 1/2 in and plastic case.Unit: CD

M-2 high-speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications. Split point ensures a true start and eliminates bit walking.Unit: EA ...

M-2 high-speed steel for strength with black oxide coating for heat and wear resistance in wood, metal or plastic applications. Split point ensures a true start and eliminates bit walking.Unit: EA

Irwin is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These...

Irwin is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are produced in a highly automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the...

Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6 mm plate, 0.095 in kerf.Unit: CD

Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6 mm plate, 0.095 in kerf.Unit: CD

Irwin Jobber Drill Bit, #7 Dia, Flute Type: Spiral, Flute Length: 2-7/16 in, Shank Type: Straight, Shank Diameter: 0.2 in, Point Type: Chisel, Point Angle: 118 deg, M-2 Grade, Cutting Edge Material:...

Irwin Jobber Drill Bit, #7 Dia, Flute Type: Spiral, Flute Length: 2-7/16 in, Shank Type: Straight, Shank Diameter: 0.2 in, Point Type: Chisel, Point Angle: 118 deg, M-2 Grade, Cutting Edge Material: HSS, HSS, 3-5/8 in OAL, Cutting Direction: Right Hand, Applicable Materials: Metal, Plastic, WoodUnit: CD