GB-GARDNER BENDER

The Gardner Bender modular plug crimp tool is used to produce patch cable and handset cables, cut, strip and crimp.Unit: CD1

The Gardner Bender modular plug crimp tool is used to produce patch cable and handset cables, cut, strip and crimp.Unit: CD1

For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width)...

For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.Unit: PK 50

Eight each miniature gray, 5 each small orange, 4 each medium yellow and large red. Five each 22-16 AWG, 16-14 AWG, 12-10 AWG ring terminals, 22-16 AWG, 16-14 AWG, 12-10 AWG spade terminals, 16-14...

Eight each miniature gray, 5 each small orange, 4 each medium yellow and large red. Five each 22-16 AWG, 16-14 AWG, 12-10 AWG ring terminals, 22-16 AWG, 16-14 AWG, 12-10 AWG spade terminals, 16-14 AWG female, male disconnects, 18-14 AWG tap splices, 22-16 AWG, 16-14 AWG, 12-10 AWG butt splices and storage compartment case included.Unit: AS 80

GB's heavy wall heat shrink tubing provides maximum reliability for insulating and protecting wire, cable and terminations. Deigned for applications where high impact, abrasion and corrosion...

GB's heavy wall heat shrink tubing provides maximum reliability for insulating and protecting wire, cable and terminations. Deigned for applications where high impact, abrasion and corrosion resistance is needed. This type of heat shrink is submersible and great for direct burial installations. The inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene.Unit: CD 1

GB's WingGard twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options...

GB's WingGard twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The...

Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive...

Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination.Unit: CD 1

These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and...

These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.Unit: CD 15 ...

GB's WingGard twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options...

GB's WingGard twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The...

ArmorEDGE long nose wire strippers by Gardner Bender are designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control, these strippers...

ArmorEDGE long nose wire strippers by Gardner Bender are designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control, these strippers offer symmetric ergonomic, cushioned handles. Easy-to-read laser etched markings make it a snap to choose the right groove for the application, while the forged steel body and double bevel cutting blades offer superior corrosion and nick resistance. The long nose design allows the user to quickly loop...

The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature...

The Gardner Bender 1-1/4 in x 1/2 in graphite metallic steel staples for NM cables are designed to secure 14/2, 12/2 and 10/2 NM cables. These straight-driving, burr-free, steel staples feature sharper tips so the legs drive in straight without splitting wood and have recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and engineered to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.Unit: BX100

These copper split bolt connectors have all copper alloy construction for high mechanical strength, maximum conductivity and low resistance.Unit: CD 2

These copper split bolt connectors have all copper alloy construction for high mechanical strength, maximum conductivity and low resistance.Unit: CD 2

GB's WingGard twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options...

GB's WingGard twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The...

Rated for 600 V copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8 in bolt size.Unit: CD 2

Rated for 600 V copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8 in bolt size.Unit: CD 2

King Innovation Utility Pump, Discharge Tube Length: 72 in, Dimensions: 36 in L, Includes: (6) Utility PumpsUnit: EA

King Innovation Utility Pump, Discharge Tube Length: 72 in, Dimensions: 36 in L, Includes: (6) Utility PumpsUnit: EA

Waterproof your outdoor splices with the DryConn small aqua/orange or medium aqua/red wire connector. This quality one-step connector is filled with a dielectric silicone sealant that surrounds...

Waterproof your outdoor splices with the DryConn small aqua/orange or medium aqua/red wire connector. This quality one-step connector is filled with a dielectric silicone sealant that surrounds splices, making it water and corrosion-resistant. This is an ideal choice for outdoor electrical connections exposed to condensation, water vapors or dust. The DryConn aqua/orange and aqua/red meet the conditions set by the most recent NEC code book, requiring a UL 486G listed connector to be used for...

These multi-range hex head connectors cover 95% of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install - you...

These multi-range hex head connectors cover 95% of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a hex tool to install - you can't over torque this connector because it's patented hex head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc-plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long-lasting strength and...

ArmorEDGE wire stripper by Gardner Bender is designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control these strippers offer 6-3/4 in...

ArmorEDGE wire stripper by Gardner Bender is designed to strip and cut solid and stranded wire. Envisioned to provide the user with the ultimate comfort and control these strippers offer 6-3/4 in symmetric ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions coupled with a coiled spring action return to reduce job-fatigue. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body...

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations...

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.Unit: CD1

Used to test DC voltage in automotive applications. Features 3 ft test lead with alligator clamp and 360 deg bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction...

Used to test DC voltage in automotive applications. Features 3 ft test lead with alligator clamp and 360 deg bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required.Unit: CD 1

The 1/4 in black polyethylene coaxial staples 25-pack feature polyethylene saddles for durability and UV resistance. These staples are ideal for securing RG-59 and RG-6 coaxial cables and include...

The 1/4 in black polyethylene coaxial staples 25-pack feature polyethylene saddles for durability and UV resistance. These staples are ideal for securing RG-59 and RG-6 coaxial cables and include zinc-plated nails that can be driven in with a hammer for quick and easy installation. 1 nail per staple for quick and easy installation.Unit: CD 25

GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 22 cu-in, Dimensions: 3.5 in H x 2.4 in W x 4.2 in D,...

GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 22 cu-in, Dimensions: 3.5 in H x 2.4 in W x 4.2 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Captive NailsUnit: EA

GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the...

GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #961H). Other...

Closed end connectors are ideal for making a simple connection of two or more wires to create a pigtail connection. The pigtail connector is a closed end, crimp on wire connector used to secure...

Closed end connectors are ideal for making a simple connection of two or more wires to create a pigtail connection. The pigtail connector is a closed end, crimp on wire connector used to secure electrical connection points. The proper installation method is to connect the wires together first and then add a pigtail connector and crimp tight to provide a safe, secure and stable connection particularly in applications subject to vibration. Designed to be used with both solid and stranded wire...

Gardner Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties...

Gardner Bender's Patented double-lock cable ties are designed for strength, durability and reliability. Ideal for all bundling purposes; wires, cables, hoses or ducts, you name it and these ties will bundle it. Made from durable 100% nylon 6/6 material, these ties feature our patented double-lock design, with locking teeth on both sides of the tie and at the head ensuring a stronger connection and 50% greater tensile strength than the industry standard. The bent tip ensures easy insertion into...