FORNEY INDUSTRIES

Premium high-strength acid flux cored silver bearing solder for joining all metals except aluminum, magnesium and zinc die-cast. 6% silver content. Stays bright and hard. Non-toxic. Joint strength...

Premium high-strength acid flux cored silver bearing solder for joining all metals except aluminum, magnesium and zinc die-cast. 6% silver content. Stays bright and hard. Non-toxic. Joint strength up to 20,000 psi. Weighs 9 oz. Working temperature of 431 deg F (221.7 deg C) and application temperature of 400 to 700 deg F (204 to 371 deg C).Unit: EA

Reliable protection. Protect your hands in even the most extreme working conditions. This welding glove is fortified with heat resistant synthetic thread for reliable protection against heat and...

Reliable protection. Protect your hands in even the most extreme working conditions. This welding glove is fortified with heat resistant synthetic thread for reliable protection against heat and flames.Unit: EA

For general-purpose use with appropriate type flux such as Forney 38120, ruby fluid, Forney 38125, paste flux or Forney 38127 and 38128, hi-temp fluxes. Not suitable for aluminum. Pressure rating of...

For general-purpose use with appropriate type flux such as Forney 38120, ruby fluid, Forney 38125, paste flux or Forney 38127 and 38128, hi-temp fluxes. Not suitable for aluminum. Pressure rating of 5500 psi. Melting temperature rating of 421 deg F (216 deg C).Unit: EA

Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low,...

Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarities are AC, DCEN, DCEP (either polarity). 5/32 in Dia, weight 5 lb (2.26 kg), 84000 psi tensile strength, 140 to 190 A.Unit: CS 4

General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals....

General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength and 70 to 110 A.Unit: EA

Bulb shape mounted rotary file and 1/4 in shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other...

Bulb shape mounted rotary file and 1/4 in shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum speed rating of 2500 rpm.Unit: EA

Aluminum oxide metal grinding wheel. Designed for metal grinding, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. For use on right-angle...

Aluminum oxide metal grinding wheel. Designed for metal grinding, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. For use on right-angle grinders.Unit: EA

Stem-mounted 4 in 'fine' wire wheel brush with 1/4 in hex shank. Designed for easy access into narrow holes and confined areas. Crimped style for light to medium duty applications. Removes rust,...

Stem-mounted 4 in 'fine' wire wheel brush with 1/4 in hex shank. Designed for easy access into narrow holes and confined areas. Crimped style for light to medium duty applications. Removes rust, scale and paint in hard to reach areas. Use with any 1/4 in Dia electric power drills or 01990 pneumatic (air) drill.Unit: EA

Tin-antimony lead-free solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required.Unit: EA ...

Tin-antimony lead-free solder can be used for soldering potable water pipe joints. Good for plumbing, refrigeration systems and other non-electrical applications where strength is required.Unit: EA

Cylindrical mounted rotary file with rounded end, flat top and 1/4 in shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze,...

Cylindrical mounted rotary file with rounded end, flat top and 1/4 in shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum speed rating of 2500 rpm.Unit: EA

Highly flexible cable manufactured with 1007 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket...

Highly flexible cable manufactured with 1007 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600 V. Conductor temperature range of -58 deg F (-50 deg C) to 221 deg F (105 deg C). Meets or exceeds ASTMB-172. 50 ft (15.24 m) reel.Unit: EA

Includes two barbed hose nipples, two hose ferrules, one each oxygen and acetylene 9/16-18 hose nuts and "B" fittings.Unit: EA

Includes two barbed hose nipples, two hose ferrules, one each oxygen and acetylene 9/16-18 hose nuts and "B" fittings.Unit: EA

High carbon steel (cross peen) chipping hammer. Tempered chisel on one end and point on the other. Black. Durable. All-purpose. Shockproof handle with loop for belthook.Unit: EA

High carbon steel (cross peen) chipping hammer. Tempered chisel on one end and point on the other. Black. Durable. All-purpose. Shockproof handle with loop for belthook.Unit: EA

Shank mounted points and grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Ideal for grinding, polishing or deburring ferrous metals or other hard surfaces. Especially useful...

Shank mounted points and grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Ideal for grinding, polishing or deburring ferrous metals or other hard surfaces. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.Unit: EA

E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent...

E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy cleanup. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. AC, DCEP, DCEN recommended polarity. 88000 psi tensile strength. 25 to 75 A on sku #s (890.9665, 890.9673, 890.9681), 35 to 125 A on sku #s (890.9707, 890.9715, 890.9723), 50 - 160 A.Unit:...

E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low...

E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806).Unit: EA

Can be used to replace or add sanding sleeves to Forney Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.Unit: EA

Can be used to replace or add sanding sleeves to Forney Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.Unit: EA

E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low...

E6013 an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints; smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work. AC, DCEP, DCEN recommended polarity. 83000 psi tensile strength. 50 to 70 A on sku # (890.9806).Unit: EA

Stem-mounted 1-1/2 in 'coarse' wire wheel brush with 1/4 in hex shank. Designed for easy access into narrow holes and confined areas. Crimped style for light to medium duty applications. Removes...

Stem-mounted 1-1/2 in 'coarse' wire wheel brush with 1/4 in hex shank. Designed for easy access into narrow holes and confined areas. Crimped style for light to medium duty applications. Removes rust, scale and paint in hard to reach areas. Use with any 1/4 in Dia electric power drills or 01990 pneumatic (air) drill.Unit: EA

Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.Unit: EA

Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.Unit: EA

Forney Screw Nipple, M22 x 3/8 in Connection, Male x MNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 3/8 in Male, Female FittingsUnit: EA

Forney Screw Nipple, M22 x 3/8 in Connection, Male x MNPT Connection, 5800 psi Pressure, 300 deg F, Suitable for: 3/8 in Male, Female FittingsUnit: EA

Forney Molded Grip Lance, 5800 psi Pressure, 1/4 in Inlet, 1/4 in Outlet, 36 in LengthUnit: EA

Forney Molded Grip Lance, 5800 psi Pressure, 1/4 in Inlet, 1/4 in Outlet, 36 in LengthUnit: EA

Flap wheel, 1/4 in shank-mounted, featuring durable, high-grade aluminum oxide coating for aggressive cleaning and refinishing on most wood or metal surfaces. Ideal for mounting on power drills or...

Flap wheel, 1/4 in shank-mounted, featuring durable, high-grade aluminum oxide coating for aggressive cleaning and refinishing on most wood or metal surfaces. Ideal for mounting on power drills or other chuck driven machines. Carded.Unit: EA

Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.Unit: EA

Colorful and sporty looking 100% cotton cap that resists sparks. Bill assembled with multi-layers of cloth for flexibility. Multi-colored, reversible. Assorted colors available.Unit: EA