ANDERSON METAL

Watts 39-P Pipe Plug, Nominal Size: 1/2 in, Flare Connection, 750 psi, Operating Temperature: -65 to 250 deg F, Brass, 8 in LUnit: EA

Watts 39-P Pipe Plug, Nominal Size: 1/2 in, Flare Connection, 750 psi, Operating Temperature: -65 to 250 deg F, Brass, 8 in LUnit: EA

Anderson Metals Tube Elbow, Nominal Size: 1/2 in, Angle: 90 deg, 750 psi, Operating Temperature: -65 to 250 deg F, BrassUnit: EA

Anderson Metals Tube Elbow, Nominal Size: 1/2 in, Angle: 90 deg, 750 psi, Operating Temperature: -65 to 250 deg F, BrassUnit: EA

Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.Unit: EA

Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.Unit: EA

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape...

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.Unit: EA

Anderson Metals Compression Stiffener and Sleeve, Nominal Size: 1/2 in, Suitable for: 1/2 in OD Plastic TubeUnit: EA

Anderson Metals Compression Stiffener and Sleeve, Nominal Size: 1/2 in, Suitable for: 1/2 in OD Plastic TubeUnit: EA

Anderson Metals Delrin Sleeve, Nominal Size: 3/8 in, Compression Connection, Temperature Rating: -65 to +250 deg F, Plastic, Suitable for: Copper, Brass, Aluminum or Plastic TubingUnit: EA

Anderson Metals Delrin Sleeve, Nominal Size: 3/8 in, Compression Connection, Temperature Rating: -65 to +250 deg F, Plastic, Suitable for: Copper, Brass, Aluminum or Plastic TubingUnit: EA

Anderson Metals Pipe Nipple, Nominal Size: 1/2 in, MPT Connection, Brass, Chrome, 3 in L, Suitable for: Copper and Iron PipesUnit: EA

Anderson Metals Pipe Nipple, Nominal Size: 1/2 in, MPT Connection, Brass, Chrome, 3 in L, Suitable for: Copper and Iron PipesUnit: EA

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Teflon tape or pipe sealant is recommended. Pipe threads...

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.Unit: EA

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape...

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.Unit: EA

Bagged.Unit: EA

Bagged.Unit: EA

Anderson Metals Pipe Nipple, Nominal Size: 1/8 in, NPT Connection, Brass, Suitable for: Brass and Steel PipesUnit: EA

Anderson Metals Pipe Nipple, Nominal Size: 1/8 in, NPT Connection, Brass, Suitable for: Brass and Steel PipesUnit: EA

One piece construction. Used with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape...

One piece construction. Used with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.Unit: EA

Three-piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 deg to 250 deg F. temperature range. Easy to disassemble, no flaring tool...

Three-piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 deg to 250 deg F. temperature range. Easy to disassemble, no flaring tool required. Primarily used for water, gasoline, oil and vacuum lines. UPC individually bagged.Unit: EA

Anderson Metals Pipe Elbow, Nominal Size: 1/4 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel PipesUnit: EA

Anderson Metals Pipe Elbow, Nominal Size: 1/4 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel PipesUnit: EA

Anderson Metals Pipe Connector, Nominal Size: 3/16 x 1/8 in, Compression x Male Connection, 400 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic...

Anderson Metals Pipe Connector, Nominal Size: 3/16 x 1/8 in, Compression x Male Connection, 400 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic TubingUnit: EA

UPC individually bagged.Unit: EA

UPC individually bagged.Unit: EA

F123 1/2 in x 3/8 in reducing hex red brass nipple.Unit: EA

F123 1/2 in x 3/8 in reducing hex red brass nipple.Unit: EA

Anderson Metals Pipe Nipple, Nominal Size: 1-1/4 in, NPT Connection, Operating Temperature: -65 to 250 deg F, Brass, 3 in L, Suitable for: Brass, Copper and Iron PipesUnit: EA

Anderson Metals Pipe Nipple, Nominal Size: 1-1/4 in, NPT Connection, Operating Temperature: -65 to 250 deg F, Brass, 3 in L, Suitable for: Brass, Copper and Iron PipesUnit: EA

Anderson Metals Tube Elbow, Nominal Size: 1/4 x 3/8 in, Angle: 90 deg, 300 psi, BrassUnit: EA

Anderson Metals Tube Elbow, Nominal Size: 1/4 x 3/8 in, Angle: 90 deg, 300 psi, BrassUnit: EA

Anderson Metals Pipe Nipple, Nominal Size: 1/4 in, NPT Connection, Brass, 3 in L, Suitable for: Brass and Steel PipesUnit: EA

Anderson Metals Pipe Nipple, Nominal Size: 1/4 in, NPT Connection, Brass, 3 in L, Suitable for: Brass and Steel PipesUnit: EA

Each kit contains high-quality 1/4 in copper tubing of 0.025 in wall thickness, one No 9604-C brass self-piercing saddle valve, one No 962-1/4 in brass tube to tube union, one No 968-1/4 in x 1/8 in...

Each kit contains high-quality 1/4 in copper tubing of 0.025 in wall thickness, one No 9604-C brass self-piercing saddle valve, one No 962-1/4 in brass tube to tube union, one No 968-1/4 in x 1/8 in brass tube to male pipe connector and one No 969-1/4 in x 1/8 in brass tube to male pipe elbow. Carded.Unit: EA

Anderson Metals Tube Elbow, Nominal Size: 1/2 x 3/8 in, Angle: 90 deg, 750 psi, Operating Temperature: 73 deg F, BrassUnit: EA

Anderson Metals Tube Elbow, Nominal Size: 1/2 x 3/8 in, Angle: 90 deg, 750 psi, Operating Temperature: 73 deg F, BrassUnit: EA

Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.Unit: EA

Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.Unit: EA

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape...

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.Unit: EA