SELKIRK

Type L vent systems for pellet stove applications. For use in accommodating unusual offsets and configurations. Up to 90 deg maximum. Rated for flue temperatures up to 570 deg F. Model VP may be...

Type L vent systems for pellet stove applications. For use in accommodating unusual offsets and configurations. Up to 90 deg maximum. Rated for flue temperatures up to 570 deg F. Model VP may be installed with a minimum 1 in air space clearance to combustible surfaces, framing lumber, drywall and plywood. UL listed.Unit: EA

Selkirk SURE-TEMP Premium Roof Flashing, Aluminum, Galvanized, 24-3/4 in OAL, 21 in OAW, Suitable for: 7 x 12 in Dia PipeUnit: EA

Selkirk SURE-TEMP Premium Roof Flashing, Aluminum, Galvanized, 24-3/4 in OAL, 21 in OAW, Suitable for: 7 x 12 in Dia PipeUnit: EA

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern,...

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.Unit: EA

Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4...

Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.Unit: EA

Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.Unit: EA

Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.Unit: EA

Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the tee snout, using a Locking Band, to pass safely...

Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the tee snout, using a Locking Band, to pass safely through combustible walls. An insulated tee cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated tee is 50 ft.Unit: EA

Can be used for fixed offsets of 15 deg slope or in pairs for offsets adjustable from zero to 30 deg slope. Greater angles are prohibited by UL standard 103 and by the terms of the product listing....

Can be used for fixed offsets of 15 deg slope or in pairs for offsets adjustable from zero to 30 deg slope. Greater angles are prohibited by UL standard 103 and by the terms of the product listing. Required locking bands (2 packaged with each elbow kit) allow 360 deg rotation and lock the components together in place at the exact offset required. Insulated elbows can be used at the same 2 in air space clearance as chimney sections. Includes 2 elbows, 2 locking bands and interior...

Type L Pellet Vent to Selkirk Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing Selkirk Chimney system.Unit: EA

Type L Pellet Vent to Selkirk Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing Selkirk Chimney system.Unit: EA

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern,...

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.Unit: EA

Selkirk Stove Pipe Elbow, Nominal Size: 6 in, Angle: 45 deg, Temperature Rating: 1200 deg F, Material Gauge: 28, 26 ga, Stainless Steel, BlackUnit: EA

Selkirk Stove Pipe Elbow, Nominal Size: 6 in, Angle: 45 deg, Temperature Rating: 1200 deg F, Material Gauge: 28, 26 ga, Stainless Steel, BlackUnit: EA

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern,...

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.Unit: EA

For a wall-supported chimney system with a horizontal connector passing through an exterior wall, connecting to a Tee and running verticaly up the exterior wall to termination above the roof line....

For a wall-supported chimney system with a horizontal connector passing through an exterior wall, connecting to a Tee and running verticaly up the exterior wall to termination above the roof line. The thru-the-wall support kit provides all necessary parts for a complete installation with the exception of required insulated pipe lengths to reach your desired chimney height.Unit: EA

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern,...

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.Unit: EA

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern,...

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed for today's modern, high-efficiency "airtight" wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The SCS is usable on any appliance having a power burner (such as an oil furnace) if that appliance operates with neutral or negative draft at its outlet.Unit: EA

Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4...

Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.Unit: EA

With proper framing, ceiling supports provide at least 2 in minimum clearance to combustibles at the support level and can carry up to 50 ft of vertical chimney height.Unit: EA

With proper framing, ceiling supports provide at least 2 in minimum clearance to combustibles at the support level and can carry up to 50 ft of vertical chimney height.Unit: EA

Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4...

Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.Unit: EA

Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4...

Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.Unit: EA

Used to trim the ceiling when a chimney is supported from above and extended down into room. Also used in conjunction with firestop/joist shield.Unit: EA

Used to trim the ceiling when a chimney is supported from above and extended down into room. Also used in conjunction with firestop/joist shield.Unit: EA

Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the Tee snout, using a locking band, to pass safely...

Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the Tee snout, using a locking band, to pass safely through combustible walls. An insulated tee cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated Tee is 50 ft.Unit: EA

Selkirk Storm Collar, Vent Hole Size: 4 in, Material Gauge: 28, Galvanized Steel, Dimensions: 7-5/8 in OD x 7-9/16 in L, Installation Type: Wall, Suitable for: Type B Gas VentUnit: EA

Selkirk Storm Collar, Vent Hole Size: 4 in, Material Gauge: 28, Galvanized Steel, Dimensions: 7-5/8 in OD x 7-9/16 in L, Installation Type: Wall, Suitable for: Type B Gas VentUnit: EA

Selkirk Roof Flashing, Aluminum/Galvanized Steel, 18 in OAL, 15-1/4 in OAW, Suitable for: 6 in Dia PipeUnit: EA

Selkirk Roof Flashing, Aluminum/Galvanized Steel, 18 in OAL, 15-1/4 in OAW, Suitable for: 6 in Dia PipeUnit: EA

Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.Unit: EA

Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.Unit: EA

Used in conjunction with a vertical insulated chimney to provide easy access for inspection and cleaning.Unit: EA

Used in conjunction with a vertical insulated chimney to provide easy access for inspection and cleaning.Unit: EA