HUBBELL ELECTRICAL

For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast...

For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed.Unit: EA

For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components....

For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2 in L x 2-3/4 in W. UL listed, CSA, NEMA 3R Rated.Unit: CD

For indoor or outdoor lighting. Die cast zinc construction. Powder coat finish. Scratch resistant. Locking swivel knuckle assures lamp positioning and directional aiming. Porcelain socket, inside...

For indoor or outdoor lighting. Die cast zinc construction. Powder coat finish. Scratch resistant. Locking swivel knuckle assures lamp positioning and directional aiming. Porcelain socket, inside gasket. 1/2 in locknut. Multi-lingual instructions. UL Standard 1598 CSA certified C22.2 no. 18 compliant. Shrink wrapped.Unit: EA

For weatherproof 30 to 50 A receptacles and wet locations. 2-5/8 in Dia. Die-cast aluminum construction, powder coat finish. Scratch-resistant. Self-closing lid assures protection when the...

For weatherproof 30 to 50 A receptacles and wet locations. 2-5/8 in Dia. Die-cast aluminum construction, powder coat finish. Scratch-resistant. Self-closing lid assures protection when the receptacle is not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket and multi-lingual instructions. UL listed 514-A, File E 195978 CSA C22.2 No. 18 NEMA 3R rated. Shrink wrapped.Unit: EA

Bell Outdoor Photo Control, Swivel Mount, Specifications: 1/2 in NPT Connection Type, 50 to 60 Hz Frequency Rating, 120 V, 2000 W, Suitable for: Single LampUnit: CD

Bell Outdoor Photo Control, Swivel Mount, Specifications: 1/2 in NPT Connection Type, 50 to 60 Hz Frequency Rating, 120 V, 2000 W, Suitable for: Single LampUnit: CD

Waterproof protection for outside receptacle. Self-closing lids. Installation hardware, gasket and multi-lingual instructions included. Size: 4-1/2 in W x 4-1/2 in L. cULus UL 514-A listed, CSA and...

Waterproof protection for outside receptacle. Self-closing lids. Installation hardware, gasket and multi-lingual instructions included. Size: 4-1/2 in W x 4-1/2 in L. cULus UL 514-A listed, CSA and NEMA 3R rated.Unit: EA

High-impact polycarbonate construction, virtually indestructible, will not rust or corrode. 2-3/4 in depth, 2-gang, pre-configured for GFCI with patented Knockout technology for alternate devices....

High-impact polycarbonate construction, virtually indestructible, will not rust or corrode. 2-3/4 in depth, 2-gang, pre-configured for GFCI with patented Knockout technology for alternate devices. 55-in-1 multiple combinations of duplex, GFCI, switch and rounds: 1-1/4 in, 1-3/8 in, 1-9/16 in, 1-5/8 in, 1-11/16 in, 1-3/4, 2-1/8 in, 2-1/4 in, 2-7/16 in. Clear lid. Lockable design prevents tampering and accidental disconnects. Tri-lingual instructions. Includes attached gasket and mounting...

For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat...

For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3...

For use in branch circuit wiring in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction....

For use in branch circuit wiring in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Five 1/2 in threaded outlets. 31 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and...

For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat...

For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3...

Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75 to 150 W maximum, not included. UL listed.Unit:...

Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75 to 150 W maximum, not included. UL listed.Unit: CD

For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual...

For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated.Unit: CD

With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box...

With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4 in outlets. Powder coat finish. 18.3 cu-in capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x...

Die cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75...

Die cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par-38 lamps, not included. UL listed 1598 C/UL.Unit: EA

Die-cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75...

Die-cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par38 lamps, not included. UL listed 1598 C/UL.Unit: EA

Die cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75...

Die cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par-38 lamps, not included. UL listed 1598, cUL.Unit: CD

Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids...

Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated.Unit: EA

For use in branch circuit wiring in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction....

For use in branch circuit wiring in wet, damp or dry locations. Can be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Five 1/2 in threaded outlets. 31 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and...

With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box...

With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Five 3/4 in threaded outlets. Powder coat finish. 18.3 cu-in capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2...

For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware....

For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in.Unit: EA

For wet locations. Gasket, screws and plugs included. Use 75 to 150 W maximum, PAR38 lamps. Die-cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes...

For wet locations. Gasket, screws and plugs included. Use 75 to 150 W maximum, PAR38 lamps. Die-cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket and multi-lingual instructions. One 1/2 in NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated.Unit: CD

Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects...

Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped.Unit: EA

Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites...

Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.Unit: EA

Die cast zinc with round 4 in cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, Par-38 lamps, not included. Includes multi-lingual instructions, gasket, screws and plugs. UL...

Die cast zinc with round 4 in cover and porcelain sockets. For wet locations. Use 75 to 150 W maximum, Par-38 lamps, not included. Includes multi-lingual instructions, gasket, screws and plugs. UL listed.Unit: CD